The wheel set for the Su-30 1:32, the 3D version is a 3D printed resin set of landing gear wheels for a model of the Su-30 in 1:32 scale, designed for the 3D printed landing gear legs from Temp Models.
Responsibility details are not available.
Resin 3D printed wheels for a model of the Su-30 in 1:32 scale with the deformation of the tires under the weight of the aircraft. From the set of the same name without the 3D suffix it differs in being designed for the 3D printed landing gear legs from Temp Models, not for the legs from the kit. Choose according to whether you will be replacing the landing gear legs as well.
The Su-30 is a two-seat multirole aircraft of the Su-27 family, intended for long patrol flights as well as for strikes against ground targets. A higher take-off weight than its single-seat predecessor means a greater load on the landing gear, so the tires are clearly settled on a machine standing still. The main legs retract forward into the fuselage and the nose leg carries a pair of wheels. Printed wheels carry this state over into scale without the simplification a mold calls for.
First wash the 3D printed parts in warm water with a little dish soap, so that they are rid of the residue of printing resin. Cut the supports off with a sharp blade or a fine saw as close to the part as possible and sand the marks down with your airways protected. Resin does not bond with cement for polystyrene, so use cyanoacrylate glue. Lay a thin coat of primer on before painting, otherwise the paint holds poorly on a smooth print. Fit the weighted wheels so that the flattened part of the tire sits on the surface, otherwise the model does not stand naturally.
The set is supplied unassembled and unpainted. Glue, paints and accessories are not included in the package, unless stated otherwise.
Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.
Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.
There are no questions here yet. Be the first to ask!
