Mini Clamp (4pcs)

AMMO Mini Clamp (4 pcs)

A set of four mini clamps from manufacturer AMMO of Mig Jimenez. It is a modeling tool for working with small parts — the part of a build where a human hand most often lets you down. A small piece glued in a hurry, held with just two fingers, shifts while curing, the joint opens up, and it has to be re-glued. A mini clamp holds it in place for you, with steady, even pressure, until the glue sets.

Four pieces in the package have a practical purpose: on a single model, several joints usually cure at the same time, and before you get to the next part, the previous one still needs holding. The clamps are sized for small parts, so they apply enough pressure without overdoing it — they will not deform a thin-walled plastic part.

Use

• Holding small parts while gluing and drying, when fingers are not enough.
• Fixing small resin and 3D-printed parts glued with cyanoacrylate.
• Holding photo-etched parts and small accessories in place while fitting them to a model.
• Holding a part during sanding and filling, so both hands stay free.
• Gluing several small joints at once — four clamps cover simultaneous work too.

Who it is for

For modelers who work with small parts and accessories — whether that means detail sets, photo-etched components, figures, or small diorama building. They are useful for beginners, saving them re-glued joints, and equally for advanced builders who glue several parts of a model at once and need to leave them to dry unattended.

For painted or sensitive surfaces, we recommend placing a piece of soft material under the jaws to avoid leaving marks. Glue is not included in the package.