The access ladder for the MiG-29UB 1:32 is a 3D printed resin model of a wheeled access ladder for the two-seat MiG-29UB in 1:32 scale for an airfield diorama.
Responsibility details are not available.
The set contains a 3D printed resin model of a wheeled ladder of the kind used on the two-seat training version MiG-29UB. The longer cockpit with two seats in tandem calls for a different arrangement than on the single-seat machine, which is why the manufacturer lists the two versions separately. It is not a model of an aircraft but an accessory for an airfield scene.
The MiG-29UB is the two-seat training version of the MiG-29 tactical fighter. The instructor sits behind the student in a raised rear cockpit with a canopy of its own, and the shape of the fuselage spine matches that. Boarding for both crew members calls for a ladder that reaches both seats. At air bases these ladders belonged to the indispensable equipment and in a diorama they give the scene its sense of scale.
First wash the 3D printed parts in warm water with a little dish soap, so that they are rid of the residue of printing resin. Cut the supports off with a sharp blade or a fine saw as close to the part as possible and sand the marks down with your airways protected. Resin does not bond with cement for polystyrene, so use cyanoacrylate glue. Lay a thin coat of primer on before painting, otherwise the paint holds poorly on a smooth print. Equipment beside an aircraft comes out best with weathering: a dark wash into the gaps, dust with dry pigment and scuffed spots suggested with a metallic shade.
The set is supplied unassembled and unpainted. Glue, paints and accessories are not included in the package, unless stated otherwise.
Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.
Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.
There are no questions here yet. Be the first to ask!
