Fengda - Jehla 0,2 mm

Fengda 0.2 mm needle, the finest replacement needle for an airbrush

A replacement needle of 0.2 mm diameter for Fengda airbrushes. The needle is a thin, precisely ground part with a sharp tip that regulates the flow of paint through the nozzle inside the airbrush; together with the nozzle it determines how fine the spray is. The 0.2 mm diameter is the finest of the usual range: it is meant for the thinnest lines and fine details and it must match a nozzle of the same 0.2 mm diameter. It serves as a replacement for a bent, blunted or damaged needle.

Use

• replacing a bent, blunted or damaged needle in a Fengda airbrush
• the finest 0.2 mm diameter for thin lines, fine details and the most precise work
• the needle and the nozzle must have the same diameter, so use a 0.2 mm needle with a 0.2 mm nozzle
• it calls for well thinned paint and lower pressure, so that the fine spray does not spit
• when fitting it, insert the needle straight and carefully; the thin tip is very easy to bend

Who the part is for

For experienced modelers with a Fengda airbrush who do the finest work: thin lines, fine shading and details. The smallest 0.2 mm diameter is the most demanding on technique and on paint thinning, so it suits advanced builders rather than beginners.

The needle has an exceptionally sharp and thin tip, so handle it very carefully, protect it from bending and put it down safely. For correct operation always use the needle together with a nozzle of the same diameter. Keep out of the reach of children.