FINE SURFACE PRIMER-FLESHTONE

Mr.Paint Fine Surface Primer - Fleshtone

A fine primer lacquer from Mr.Paint in a flesh tone. It is a lacquer (solvent) product intended for application with an airbrush; it is pre-thinned and ready to use straight away. Not to be confused with water-thinnable acrylics: it is thinned only with lacquer thinner, not with water.

Use

• a base under paint on plastic, resin and metal for better adhesion and a uniform base
• a flesh tone as the opening coat under skin colors on figures or as a unifying base
• it goes on with an airbrush in thin coats; it is thinned with the lacquer thinner of the same brand
• it dries quickly and seals the surface finely, so that small details come out

Who it is for

For modelers who work with an airbrush and want a good fine primer in a flesh tone. The pre-thinned consistency makes the work easier for the less experienced too.

Solvent-based lacquer product: flammable. Use in a well ventilated space and protect your airways and skin. Do not thin with water.