Flexible tin wire with a diameter of 0.6 mm from Green Stuff World. A medium diameter for hoses, lines and reinforcement that has to hold its shape.
Responsibility details are not available.
A soft metal wire on a spool with a diameter of 0.6 mm. Once bent it stays in its new position and does not spring back, which is the most important property when shaping hoses and lines. A modeler can shape a cable away from the model, check how it runs and only then seat it in place.
A diameter of six tenths suits fuel and hydraulic hoses, bundles of cables, grab handles, thin rods and reinforcement inside sculpted parts. In dioramas it serves as wire fencing, as a low-voltage line or as the armature for climbing plants onto which fine foliage is glued.
Cut with nippers and use round-nose pliers when bending if you want a regular curve. Degrease the wire before painting and apply a primer. If you are imitating a braided cable, wind a thinner wire around the wire at a regular pitch and spray the whole thing; that gives you a very convincing texture. Flatten the ends with pliers as end fittings. When gluing it into a drilled hole, apply the glue to the wire, not into the hole, or the joint will flood.
This is a material, not a finished part. Degreasing and a primer are recommended before painting.
Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.
Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.
There are no questions here yet. Be the first to ask!
