A set of three-dimensional SPACE decals for the Mi-8MT in 1:48 scale from the Czech manufacturer Eduard adds color details with relief to the model.
Responsibility details are not available.
This is a set of decals from the SPACE line of the Czech manufacturer Eduard for a plastic model of the Mi-8MT transport helicopter in 1:48 scale. The motifs are printed with relief and finished in color, so once applied they read three-dimensionally and you do not have to spray them. It is not a model or a kit but an accessory for the basic kit.
The Mi-8MT is a transport helicopter of the Mi-8 family, designated Mi-17 in its export form. Its cockpit is well glazed and busy, so anyone who looks at a finished model from close up will notice it. That is exactly where the three-dimensional decals are aimed.
The surface has to be clean, degreased and smooth. Carefully cut away the details suggested in the plastic that the decal replaces and sand the area back. Cut each motif out with a sharp scalpel right at the edge and transfer it with tweezers. With a sponge and a drop of detergent, moisten only the backing paper, lift the element off it and fix it in place with white PVA glue; do not use a decal softener or setting solution, which would attack the printed resin. The finished surface can be evened out with a matte varnish.
This is an accessory for a model. The base kit, glue and paints are not included in the package, unless stated otherwise.
Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.
Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.
There are no questions here yet. Be the first to ask!
