A small abrasive kit for refining a surface in places a file and a sanding block cannot reach. It holds a handle, a glass fiber pen, a tip with a rubber end and six self-adhesive abrasive papers in two grits.
Responsibility details are not available.
The hardest places to refine are the ones that are recessed, rounded or surrounded by detail that will not take a single scratch. A seam between the fuselage halves running around a blister, a burr on a photo-etched part, a gate mark inside a wheel well, or oxidized brass that has to be freshened before soldering. For tasks like these a large sanding block is too coarse a tool and paper wrapped around a finger is too imprecise.
The kit answers both. At its heart is a handle with two interchangeable tips. The first takes a glass fiber pen two millimeters in diameter and eleven centimeters long, which works as a very fine rotary brush guided by hand: it takes the oxidation off photo-etch and off wire, smooths a small burr and does not damage the surrounding engraving in the process. As the fibers wear down, the stick is advanced further out and goes on working.
The second tip has a rubber end, onto which the supplied self-adhesive papers are stuck. The flexible backing follows the shape of the part, so the edge of the paper does not bite into the surface and the sanding leaves no flat spots. Six papers are included, three in P1000 grit for removing a seam and three finer ones in P2000 for smoothing before the primer goes on.
The kit suits the building of plastic and resin models alike and work with metal accessories. The handle sits in the hand like a pencil, which helps noticeably during long work on one spot. The tips are held in the handle so that they can be swapped quickly, even in the middle of a job.
Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.
Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.
There are no questions here yet. Be the first to ask!