RIVETER TRIPLE 0.70 MM is a three-row riveting wheel for imitating rivet rows on plastic models. The figure of 0.70 mm from the name identifies the version within the range.
Responsibility details are not available.
A three-row riveting wheel for imitating rivet rows in plastic. It is not a kit and not an accessory to one particular model, but a workshop tool that will last for dozens of builds. The designation TRIPLE corresponds to the three-row version; the brand distinguishes the single-row and two-row versions in the same way. The figure of 0.70 mm in the name tells the individual sizes in the range apart: a lower value means a finer track, a higher one a coarser track. This version belongs to the middle part of the range.
The medium sizes are the most universal part of the range. They suit fuselages and surfaces where the riveting is to stay distinct even after painting, and they take later picking out with a dark wash or a pass of the dry brush. The three-row version makes sense here mainly on long seams, where three separate passes could not be kept parallel and the track would drift apart.
If you are also planning to add panel lines by scribing, do the lines first and the rivets after them. Done the other way round, the ruler rests unevenly on the finished dimples and the line breaks.
Care: keep the working part clean and dry and store the tool so that it does not get knocked about against other tools. The box holds the riveting wheel itself; plastic, templates and paints are not included.
Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.
Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.
There are no questions here yet. Be the first to ask!
