Roll ROD I from the Czech maker 3Detail is an aid for rolling flat photo-etched parts into cylindrical shapes. It is useful wherever a straight strip has to become a tube or a curve.
Responsibility details are not available.
While a bending tool makes sharp edges, this jig deals with the opposite task: a smooth curve. With the help of a cylindrical rod, a flat photo-etched part is formed into a curve or rolled into a closed section. That is how exhausts, tanks, covers, bands around a fuselage or winch drums are made, which would otherwise be very hard to form from flat sheet.
Lay the part on a softer surface, for example on harder rubber or on thicker cardboard, put the rod against it and roll it back and forth with steady pressure. The material takes up the curve gradually, not in one pass. With closed cylinders it is better to run the shape down to a smaller diameter than the target one, because brass always springs back a little once released. The seam can then simply be joined with a drop of superglue or with solder. Before rolling, it pays to anneal the part; that increases its workability considerably.
The tool works with thin metal parts. Keep out of the reach of children. For the range of diameters it will form, follow the data given by the manufacturer on the packaging.
Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.
Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.
There are no questions here yet. Be the first to ask!