Spot-On Pigment No. 19 Fresh Rust

Spot-On Pigment No. 19 Fresh Rust

A loose modeling pigment from the numbered Spot-On range by the manufacturer VMS. This item carries the sequence number No. 19 and the shade name Fresh Rust, that is fresh rust. It is the youngest tone of the rust part of the range and is used only in small areas where corrosion is only beginning. Note when choosing: an item from another VMS range, Pigment Jockey No. 08 Fresh Rust, carries the same shade name. These are two separate ranges, not the same product, so check by the number and the name of the range which version you want.

Use

• Fresh corrosion patches in chips in the finish, on edges and in damaged places.
• Rust streaks running down vertical surfaces from freshly exposed places.
• Brightening older rust layers in places where corrosion is meant to look active.
• Small details such as handles, hinges, chains and fastenings.

Work tips

Fresh rust always covers a smaller area on a model than old rust. Apply it deliberately with a small brush in specific places rather than over the whole surface, otherwise the model quickly looks disordered. A good guide is the logic of the surface: corrosion begins where the finish is damaged mechanically, that is on edges, around hatches and in places that are walked or climbed on. Leave a darker tone around a patch, so that the transition is not abrupt.

Who the pigment is for

• Modelers who build corrosion in several tones and want to finish it with the lightest link.
• Modelers of modern vehicles, where corrosion is only local and fresh.
• Builders of dioramas with metal props exposed to damp.

This is a loose powder. Do not breathe it in, work with good ventilation and keep out of the reach of children.