Štěrk vel. 0 - Rohovec šedohnědý - 1kg

Ballast size 0 - Gray-brown chert - 1 kg is crushed natural stone in a gray-brown tone for ballast beds, roads and diorama terrain. A 1 kg package, made by Polak.

Manufacturer Polák
Product EAN8591111000000

Responsibility details are not available.

5.56 €
4.60 € without VAT
In stock
Free shipping on orders over 1,000 czk in czech republic Personal pickup in Prostějov 14-day returns

About product

Ballast size 0 - Gray-brown chert, a 1 kg package

This is not a kit but a loose scenic material. The package contains crushed natural stone sieved to a single size fraction. It is used as a ballast bed under track, as the surface of field and unpaved roads, as material for embankments or as a base for terrain work on a diorama. Chert is a hard sedimentary rock; in this form it has a gray-brown, mildly warm tone that sits well with the usual shades of dust and earth and does not look as contrasting in a scene as dark volcanic rock.

Grain size

The designation size 0 refers to the size range in which the manufacturer grades its stone. The range begins with fine dusts and ends with coarser fractions; size 0 belongs to the coarser steps and suits anywhere the individual grain is meant to read clearly in a finished scene. The one-kilogram package is intended for larger areas, longer stretches of track or for builders who need the same shade repeatedly.

Use

  • Level the base, pour the material on and spread it with a soft brush into an even layer.
  • Before fixing, dampen the area lightly with soapy water so that the glue runs in better.
  • Fix it with thinned PVA glue or with an agent intended for scenic materials.
  • Once dry, fine-tune the tone with thinned paints, washes and pigments and blend it in with the surrounding terrain.

Who the material is for

For builders of dioramas, cabinet scenes and railroad layouts, and for modelers who want to stand a model on real stone. The material is not tied to one scale; what decides is the grain size relative to the model.

A natural material. Keep out of the reach of small children, and do not breathe in the dust while decanting it or sanding a fixed layer.

Reviews

No reviews yet Have you built this one? Tell other modellers how it went and help them choose.

Forum

Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.

Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.

There are no questions here yet. Be the first to ask!

FAQ

Only in grain size. The finer steps of the range read as dust and fine gravel, while size 0 belongs to the coarser ones and the individual grains stay legible in a scene.

The shade comes from the natural stone, so batches may differ slightly. It can be fine-tuned with thinned paints and pigments once it has been fixed.

Dampen the area with soapy water and flood it with thinned PVA glue. Once dry the layer holds and stays matte.

Consumption depends on the thickness of the layer and on the area. The one-kilogram package is intended for larger scenes and longer stretches of track.

Last seen

PolákPOL5234K

Štěrk vel. 0 - Rohovec šedohnědý - 1kg

Ballast size 0 - Gray-brown chert - 1 kg is crushed natural stone in a gray-brown tone for ballast beds, roads and diorama terrain. A 1 kg package, made by Polak.
In stock
5.56 €
TamiyaTA87012

Tamiya Cement ( 20ml ) - Lepidlo na plast.modely se štětečkem

The classic liquid cement for plastic Tamiya Cement with a brush in the cap, 20 ml package. It dissolves the surface of polystyrene and creates a strong, lasting joint.
In stock
3.16 €
MN-hobby72F0051:72

1:72 Strážník unimoformované protektorátní policie 1944

A constable of the uniformed Protectorate police, 1944 , is a small resin figure in 1:72 scale by MN-hobby.
In stock
2.36 €
1:32 Albatros D.I 3D-Printed & coloured Interior on decal paper-25 %Stock ClearanceFavorite
Quinta StudioQD320761:32

1:32 Albatros D.I 3D-Printed & coloured Interior on decal paper

The Albatros D.I, a 3D printed color interior on decal paper in 1:32 scale from Quinta Studio carries the textures of wood and leather over without painting.
Last one!
23.56 €17.68 € You save 5.88 €
Mr.PaintMRPC002

FORD GT GULF Orange {Heritage Edition}

Ford GT Gulf Orange (Heritage Edition) is a modeling lacquer paint ready to spray with an airbrush, in the authentic shade of Gulf racing orange.
In stock
5.96 €
New WareNWAM00731:48

1:48 Grumman F-14A TomcatEXPERT kabuki masks

Pre-cut painting masks of kabuki paper tape for a model of the Grumman F-14A Tomcat in 1:48 scale, in the version marked EXPERT.
In stock
7.96 €
Kits-WorldKW320891:32

1:32 Boeing B-17F-27-BO 'Knock-out Dropper'

Decals 1:32 for the Boeing B-17F in the finish of the machine that was the first bomber of the Eighth Air Force to complete its fiftieth combat mission. The raid from the fall of 1943, Molesworth base.
In stock
11.96 €
Artwox ModelAM200131:700

1:700 Light Cruiser ChungKing Deck Masking Sheet for Flyhawk kit 1111

Artwox Model 1:700 a masking template for the deck of the light cruiser Chungking is a self-adhesive pre-cut mask for spraying the deck areas. It contains no wood veneer; it is an aid for painting the Flyhawk 1111 kit.
In stock
3.96 €
Plastruct PLT90004

Angle (1pcs) H 3.2, W 3.2, T 0.8, L 375 mm

The Plastruct angle is a precise plastic L section 3.2 x 3.2 mm across and 375 mm long for modeling structures and frames.
In stock
1.80 €
ŘOP o.s.MNFDT350201:35

1:35 T-34/76 Model 1943 - German Captured T-34

Decals in 1:35 scale for the T-34/76 Model 1943 tank in German captured service. Wet decals, applied through water.
In stock
7.96 €
Loading, please wait...

Setting consent to personalization

With your consent, we may use the information below for the following purposes or share it with selected partners. You can adjust your settings for individual purposes (types of processing) and confirm your choice with the "Save settings" button:

Always active

Necessary cookies

These are technical files that are necessary for the correct behavior of our website and all its functions. They are used, among other things, to store products in the shopping cart, display products on request, control filters, personal settings and also set consent to the use of cookies. Your consent is not required for these cookies and it is not possible to remove it.

Analytical cookies

They count website traffic and, by collecting anonymous statistics, enable the operator to better understand their visitors and thus constantly improve the site.

Marketing cookies

They collect information to better tailor advertising to your interests, both on and off this website.

Setting consent to personalization

To make it easier for you to browse the site, to offer you customized content or advertising, and to analyze traffic anonymously, we use cookies that we share with our partners for social media, advertising, and analytics. You can adjust their settings with the "Edit settings" link and you can change it at any time in the footer of the website. You can find more detailed information in our Policy on the protection of personal data and the use of cookies.