Tamiya

831 products
Product filtering
up to €
TamiyaTA86032

PS32 Corsa Gray Spray Matt

PS-32 Corsa Gray is a Tamiya spray from the PS line with a capacity of 100 ml, developed for the clear polycarbonate bodies of RC models. The manufacturer describes the shade as a light gray with a hint of blue.
In stock
6.76 €
TamiyaTA9807028

Paint Cup 7ml for 74503, 74510, 74527, 74532, 74544, 74545

A spare 7 ml paint cup for Tamiya airbrushes with a detachable cup . It is the smallest of the sizes the manufacturer supplies for these airbrushes.
In stock
23.96 €
TamiyaTA9807027

O-Ring Bag: 74503

A pack of replacement O-rings for the Tamiya 74503 airbrush . Unlike a single seal, it is a bag of sealing rings for airbrush maintenance.
Currently unavailable
2.36 €
TamiyaTA9807004

Needle Holder Set pos.12,13 74520

A spare needle holder set for the airbrush from the Tamiya 74520 outfit . It holds the needle in the body of the airbrush and passes the pull of the trigger on to it.
In stock
5.16 €
TamiyaTA87238

Tamiya Cement(Low Odor) 40ml

Tamiya Cement (Low Odor) 40ml is a glue for plastic models with reduced odor, supplied in a square bottle with a brush in the cap. It joins the polystyrene parts of kits.
In stock
5.16 €
TamiyaTA82184

LP-84 Camouflage Gray

Tamiya LP-84 Camouflage Gray is a covering lacquer shade of 10 ml . The manufacturer gives it for the fuselages of contemporary US aircraft; unlike the mixing shades of the same line it covers on its own.
In stock
2.20 €
TamiyaTA82182

LP-82 Mixing Red

Tamiya LP-82 Mixing Red is a lacquer mixing shade of 10 ml with a single red pigment. It is not a covering red but a paint for mixing your own tones.
In stock
2.36 €
TamiyaTA82181

LP-81 Mixing Blue

Tamiya LP-81 Mixing Blue is a lacquer mixing shade of 10 ml with a single blue pigment. It is not a covering blue but a paint intended for mixing your own shades.
In stock
2.36 €
TamiyaTA7807261

Needle 0.2mm 74549

A replacement 0.2 mm needle for the Tamiya 74549 airbrush , that is for the trigger-type airbrush of the HG line in the fine version. The needle thickness matches a 0.2 mm nozzle.
Currently unavailable
12.76 €
TamiyaTA7807257

SX05D Nozzle for 74802

A spare 0.5 mm nozzle for the Tamiya 74802 airbrush , that is for the double-action SX model with a 15 ml cup. It is the nozzle on its own, not the needle and not a whole airbrush.
In stock
23.96 €
TamiyaTA7807250

SX03D Needle for 74801

A spare 0.3 mm needle for the Tamiya 74801 airbrush , that is for the metal SX model with a 0.3 mm nozzle. The thickness of the needle matches that nozzle size exactly.
In stock
8.76 €
TamiyaTA7807248

SX3D AIR VALVE w/O-RING 74801

An air valve with an O-ring is a genuine Tamiya spare part for the Sparmax SX 0.3D 74801 airbrush that opens the air supply.
In stock
14.36 €
TamiyaTA7807247

SX3D PISTON O-RING 74801

A replacement piston O-ring for the Tamiya 74801 airbrush , that is for the SX model with a 0.3 mm nozzle. It seals the moving piston of the air valve, not the needle.
Currently unavailable
5.16 €
TamiyaTA7807245

SX3D SPRING CASE 74801

A spring case is a genuine Tamiya spare part for the Sparmax SX 0.3D 74801 airbrush and holds the needle spring on the axis.
In stock
5.56 €
TamiyaTA7807244

SX3D SPRING 74801

A needle spring is a genuine Tamiya spare part for the Sparmax SX 0.3D 74801 airbrush and gives the trigger its resistance on the rearward pull.
In stock
5.16 €
TamiyaTA7807243

SX3D NEEDLE CHUCKING GUIDE 74801

A needle chucking guide is a genuine Tamiya spare part for the Sparmax SX 0.3D 74801 airbrush, that is a component of the rear mounting of the needle.
In stock
9.56 €
TamiyaTA7807242

SX3D LEVER SCREW 74801

A lever screw is a genuine Tamiya spare part for the Sparmax SX 0.3D 74801 airbrush and holds the trigger in place.
In stock
5.16 €
TamiyaTA7807241

SX3D NEEDLE GUIDE 74801

A needle guide is a genuine Tamiya spare part for the Sparmax SX 0.3D 74801 airbrush that holds the needle on the axis of the body.
In stock
5.16 €
TamiyaTA7807240

SX3D O-RING NEEDLE 74801

A needle sealing O-ring is a genuine Tamiya spare part for the Sparmax SX 0.3D 74801 airbrush and keeps paint from reaching the mechanism.
In stock
3.96 €
TamiyaTA7807239

SX3D PUSH BUTTON 74801

An air valve push button is a genuine Tamiya spare part for the Sparmax SX 0.3D 74801 airbrush, the part the trigger seats on.
In stock
7.96 €
Loading, please wait...

Setting consent to personalization

With your consent, we may use the information below for the following purposes or share it with selected partners. You can adjust your settings for individual purposes (types of processing) and confirm your choice with the "Save settings" button:

Always active

Necessary cookies

These are technical files that are necessary for the correct behavior of our website and all its functions. They are used, among other things, to store products in the shopping cart, display products on request, control filters, personal settings and also set consent to the use of cookies. Your consent is not required for these cookies and it is not possible to remove it.

Analytical cookies

They count website traffic and, by collecting anonymous statistics, enable the operator to better understand their visitors and thus constantly improve the site.

Marketing cookies

They collect information to better tailor advertising to your interests, both on and off this website.

Setting consent to personalization

To make it easier for you to browse the site, to offer you customized content or advertising, and to analyze traffic anonymously, we use cookies that we share with our partners for social media, advertising, and analytics. You can adjust their settings with the "Edit settings" link and you can change it at any time in the footer of the website. You can find more detailed information in our Policy on the protection of personal data and the use of cookies.