XF-6 Copper 10ml

Tamiya XF-6 Copper (Enamel), 10 ml

A modeling paint from Tamiya's enamel (synthetic) line in a 10 ml volume. What is notable about this shade: it is a metallic placed in the matte line — the prefix XF for Tamiya means a matte shade (as opposed to the gloss X), which is unusual for metallic paints. The result is a copper without a mirror-like shine, with more of a muted metallic cast, which suits older, used and weathered metal very well. Do not confuse it with acrylic: this paint is an enamel, i.e. solvent-based, and is thinned with X-20 thinner — not the acrylic X-20A. Tamiya also offers the same XF-6 number as an acrylic, which is the most common source of mix-ups.

Use

• Copper pipework, boilers and fittings, historical ships, steam equipment, weathered and used metal surfaces.
• The metal pigment settles to the bottom — stir the bottle before use until the sediment fully disappears, or the shade will come out weak and uneven.
• Metallic copper looks best on a smooth, well-prepared base — a rough surface breaks up the pigment and the paint loses its metallic character.
• Metallics are hard to mask and hard to overcoat, so apply them as one of the last steps in the painting process.
• Works for airbrush and brush; for spraying, thin with X-20 (the manufacturer's default ratio is roughly 2 parts thinner to 10 parts paint).
• Enamels are commonly used for washes and panel-line highlighting over a cured acrylic base.

Who the paint is for

For builders of ships, historical and industrial equipment, diorama makers, and anyone who wants a realistic copper without an exaggerated shine. Thanks to the matte base, it is easier to weather and combine with pigments.

Safety: flammable. Irritates the airways — work with good ventilation and respiratory protection, especially with an airbrush. Keep out of the reach of children. Lacquer (nitro) paints must not be applied over enamel.