A masking set for a model of the de Havilland Mosquito in the B.IV and PR.IV versions in 1:144 scale from Peewit. An addition to the build, not a kit.
Responsibility details are not available.
A set of precisely cut self-adhesive masks for a model of the British de Havilland Mosquito in the B.IV and PR.IV versions in 1:144 scale. It is not a kit but an addition: the masks go onto the glazed areas of the cabin and the nose, so that they stay clear after painting and the frames have a sharp edge. In 1:144 scale the frames are practically impossible to cut by hand, so a pre-shaped mask of low-tack tape is the surest route to a clean result.
The de Havilland Mosquito was among the most remarkable aircraft of the Second World War. Its airframe was built largely of wood, which saved strategic metals and made it possible to bring furniture workshops into production. The B.Mk.IV version was a bomber and the PR.Mk.IV a photo-reconnaissance machine; both did without defensive armament and relied on speed and altitude. The bomber Mosquitoes became famous for accurate attacks from low level, while the reconnaissance machines took photographs deep over enemy territory.
Degrease the clear part and let it dry. Lift the masks out with tweezers, lay them in place and press the edges down so that no paint runs under them. Work in good light, with a magnifier if need be. Spray the shade of the frames first, then the outer color in thin coats. Remove the masks only once the paint has dried, with fine-tipped tweezers at a shallow angle.
This is an addition for building a model. The model, paints and glue are not included in the package.
Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.
Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.
There are no questions here yet. Be the first to ask!