A 1:32 Bristol F.2b Fighter masking set from HGW. It is not an aircraft model but precisely shaped self-adhesive masks for spraying the canopy framing and the other glazed areas of the Bristol F.2b Fighter in 1:32 scale easily and cleanly.
Responsibility details are not available.
This is a set of self-adhesive masks, not a stand-alone model. The HGW masks are precisely cut from fine Japanese paper tape (kabuki) and serve to mask the glazed areas when spraying the Bristol F.2b Fighter in 1:32 scale. They let you spray the canopy framing and the other glazed areas sharply and without paint creeping under the edge. The masks are designed to the shape of the corresponding kit in this scale and are not intended for the model itself.
The Bristol F.2b Fighter, nicknamed Brisfit, was a British two-seat fighter and reconnaissance aircraft of the First World War. The combination of a sturdy structure, good speed and a flexible rear machine gun made it a feared opponent once the right tactics had been mastered; it stayed in service long after the war.
Carefully lift the pieces off the sheet, transfer them onto cleaned and degreased glazing and press the edges down thoroughly so that paint cannot creep underneath. The masks follow the framing of the canopy, so the slow cutting of tape is unnecessary. For thin areas use thin coats of paint and lift the mask off while the sprayed finish has only just dried. The leftover parts of the sheet can be used to cover the surrounding areas against overspray.
This is an accessory for masking; the kit itself, paints and glue are not included in the package.
Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.
Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.
There are no questions here yet. Be the first to ask!
