Eduard 1:32 Douglas A-26C Invader rear interior is a photo-etched detailing set for the rear part of the interior. It is an accessory for a plastic model in 1:32 scale, not a kit.
Responsibility details are not available.
A photo-etched detailing set from the Czech maker Eduard for working up the rear part of the interior on a model of the Douglas A-26C Invader in 1:32 scale. The parts are etched from thin sheet and fill out an area that injection-molded plastic handles only in simplified form. The set is not a kit — to use it you need the matching plastic model.
The name limits the set to the rear interior, that is the space behind the pilot's cockpit. In 1:32 scale this is an area clearly visible with the hatches and the glazing open, and where the difference between bare plastic and photo-etched metal tells the most. The specific extent of the parts is given in the manufacturer's instructions.
The Douglas A-26 Invader was an American twin-engine all-metal attack aircraft. The internal layout of the fuselage behind the cockpit included the station of the rear crew member and technical equipment; on a model it is a space that a suitable build can open up to view.
Separate the parts with a sharp scalpel on a hard surface, not with nippers. Make the bends in a bender or between two blades. Degrease the sheet and glue with superglue (cyanoacrylate) or an adhesive for photo-etched parts — ordinary cement for plastic will not join metal. Paint the inner parts before the fuselage is closed up; use a primer meant for metal on bare sheet. Plan the small parts out in advance and fit them in order from the largest to the smallest.
This is an accessory for a model, not the model itself. The kit, glue and paints are not included in the package, unless stated otherwise.
Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.
Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.
There are no questions here yet. Be the first to ask!
