1:35/1:48/1:72 3D-Print Crystal for Diorama C

3D-printed crystals for dioramas, variant C extend the range of LIANG Model scenic accessories with a further set of crystal formations for bases and vignettes.

Scale1:35
Manufacturer LIANG Model
Product EAN8591111000000

Responsibility details are not available.

11.56 €
9.55 € without VAT
In stock
Free shipping on orders over 1,000 czk in czech republic Personal pickup in Prostějov 14-day returns

About product

3D-printed crystals for dioramas, variant C

A set of scenic accessories, not a kit and not a model. It contains 3D-printed crystal formations intended to be set into a base, a block of rock or a terrain relief. The name gives three scales at once, which is usual with an accessory of this type: a crystal has no fixed real subject, so you decide on its size in a scene according to the figure or the equipment you are building it beside.

Composition of a scene

A crystal formation is a strong visual element and easily overpowers the rest of a scene. It is proven practice to keep it off the axis of a base and to leave it free space, so that no other details compete against it. If you are building a figure, turn it so that it points toward the formation with its gaze or a gesture, which turns two separate elements into one story. Variant C is one of several variants of the range; the sets can be combined in one scene and so create irregular clusters.

Preparation, gluing and painting

Cut the remains of the supports off with a scalpel and sand the area of the foot flat, so that the formation sits with no gap. Glue with cyanoacrylate glue, and with larger pieces we recommend strengthening the joint with a pin of wire. Build the painting from a light base up to thin coats of clear tinting paints. Fine-tune the contrast with a dark wash in the cracks and by lightening the edges. A final gloss varnish on the crystals alone, while the terrain around them stays matte, will emphasize the difference between the materials.

Who the set is for

  • Modelers of fantasy and science fiction vignettes
  • Builders of bases for busts and figures
  • Makers of cave, mine and alien scenes
  • Collectors who already have another variant of the range and want to extend it

The accessory is supplied unpainted. Paints, glue and a base are not included in the package, unless stated otherwise.

Reviews

No reviews yet Have you built this one? Tell other modellers how it went and help them choose.

Forum

Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.

Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.

There are no questions here yet. Be the first to ask!

FAQ

Yes, it is a separate product in its own right. The other variants of the range are not needed with it, but they can be combined with it in one scene.

A crystal has no fixed real subject, so the set serves as a universal material. The same formation can represent a rock massif in 1:72 and a smaller outgrowth in 1:35.

Cut the supports off, sand the foot flat and strengthen the joint with a short wire pin glued with cyanoacrylate glue into a hole drilled in the surface.

They do not. Translucent painting is only one route; opaque mineral shades with emphasized edges work just as well if the scene is to come across realistically.

Last seen

LIANG ModelLIANG-04281:35

1:35/1:48/1:72 3D-Print Crystal for Diorama C

3D-printed crystals for dioramas, variant C extend the range of LIANG Model scenic accessories with a further set of crystal formations for bases and vignettes.
In stock
11.56 €
Pimp My MiniaturesAFVs35-1671:35

1:35 Cupola for Tiger II welded with drain slits

A welded Tiger II cupola with slits, 1:35 , the welded commander's station of the heavy tank with fine slits around the foot.
In stock
11.16 €
AoshimaAO063661:24

1:24 SR40G Townace/Liteace Noah '96

The plastic kit Toyota Townace and Liteace Noah SR40G in 1:24 scale from the Japanese maker Aoshima captures the family van of 1996.
In stock
29.96 €
Mettalic DetailsMDP350011:35

1:35 UH-60 seat belts for cabin seats

The 1:35 Metallic Details cabin seat belts for the UH-60 are pre-colored 3D decals of the seat belts. They raise the detail of the helicopter interior without replacing the seats.
In stock
13.96 €
Loading, please wait...

Setting consent to personalization

With your consent, we may use the information below for the following purposes or share it with selected partners. You can adjust your settings for individual purposes (types of processing) and confirm your choice with the "Save settings" button:

Always active

Necessary cookies

These are technical files that are necessary for the correct behavior of our website and all its functions. They are used, among other things, to store products in the shopping cart, display products on request, control filters, personal settings and also set consent to the use of cookies. Your consent is not required for these cookies and it is not possible to remove it.

Analytical cookies

They count website traffic and, by collecting anonymous statistics, enable the operator to better understand their visitors and thus constantly improve the site.

Marketing cookies

They collect information to better tailor advertising to your interests, both on and off this website.

Setting consent to personalization

To make it easier for you to browse the site, to offer you customized content or advertising, and to analyze traffic anonymously, we use cookies that we share with our partners for social media, advertising, and analytics. You can adjust their settings with the "Edit settings" link and you can change it at any time in the footer of the website. You can find more detailed information in our Policy on the protection of personal data and the use of cookies.