1:35 BT-7 Painting Mask is a set of self-adhesive stencils for spraying camouflage onto a model of the BT-7 fast tank in 1:35 scale. It serves to define the color areas during spraying, not to mask the glazing.
Responsibility details are not available.
Self-adhesive stencils that define the shape of the camouflage patches on a model of the BT-7 fast tank. They are laid onto a dry base coat, a further shade is sprayed through them, and once they are off an exact pattern stays, with a shape matching the parts of the kit in question. The set does not replace masking tape on the vision ports and the headlights, which is still needed.
The most common fault with spray stencils is not the wrong shape but paint creeping under the edge. So once the stencil is applied, run a blunt tool around its whole perimeter, for instance a wooden toothpick or the smooth back of a pair of tweezers, and press from the center toward the edge. The places where the mask crosses a rivet, a weld or the edge of the armor need pressing down especially carefully. If the mask does not seat at such a place, the paint gets under it by capillary action and the edge will be blurred.
Spray at lower pressure and with less paint than for an overall coat, and perpendicular to the surface. An angled pass drives the paint under the edge of the mask. The ideal is to lay on several very thin coats with a short pause until the area covers. Thinner paint runs under the edge more readily than thicker, so with stencils it pays to thin it less than usual.
The stencils are a modeling accessory. The kit, the paints and the clear coat are not included in the package.
Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.
Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.
There are no questions here yet. Be the first to ask!