A Mr.Paint modeling paint in the green shade A II 3 from the range of Soviet aircraft colors of the Second World War. It is supplied pre-thinned for immediate spraying.
Responsibility details are not available.
A modeling paint on a lacquer base in the green shade carried under the designation A II 3. It belongs to the range of shades of Soviet aircraft of the Second World War. The paint is thinned by the manufacturer to a consistency suited to an airbrush, so it is poured straight from the bottle into the cup and normally does not have to be thinned. The package volume is 30 ml.
The paint is intended for spraying, not for brush work. Spray it in thin coats at low pressure and leave a short pause between them. It dries quickly and forms a thin hard layer that holds well on plastic and on metal. The surface under it only needs degreasing, and on photo-etched and metal parts a base coat pays off. Clean the airbrush and the cup with lacquer thinner, because water will not dissolve this paint.
Apply masking tape or masking film only to a fully cured layer, not to one that is only dry on the surface. The paint gives off a strong smell, so work in a ventilated space and with extraction. Once dry the shade looks slightly different from the way it does in the bottle, so try it on a test piece of plastic.
For the modeler with an airbrush who builds Eastern Front subjects and wants the shade ready without mixing and thinning.
The package contains the paint only. Thinner, primer and varnish are not included, unless stated otherwise.
Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.
Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.
There are no questions here yet. Be the first to ask!
