Víkendové slevy -20 %! | Weekend Sale – 20% OFF! | MASTER • KELIK • RESKIT • QUINTA STUDIO • EDUARD • GUNZE • VALLEJO

1:35 Marmon-Herrington - IBG

The Quickwheel masking set for the wheels of the Marmon-Herrington armored car in 1:35 scale is cut for the IBG kit.

Scale1:35
Manufacturer Quickwheel
Product EAN8591111000000

Responsibility details are not available.

4.76 €
3.93 € without VAT
In stock
Free shipping on orders over 1,000 czk in czech republic Personal pickup in Prostějov 14-day returns

About product

Quickwheel Marmon-Herrington wheel masks 1:35

A masking set for painting the wheels of the Marmon-Herrington armored car. It is not a model or a resin replacement for the wheels — the masks cover the rim so the tire can be sprayed in a shade of its own with a sharp edge. The set is cut for the kit from IBG.

What makes the wheels of this vehicle special

The Marmon-Herrington is a wheeled armored car, not a tracked vehicle, so what you have here is not a row of small rollers but four large individual wheels with an off-road tread. Each of them is a separate, clearly visible object on the model: the tire is tall, wide and has a pronounced tread pattern, while the metal rim is relatively small. It is precisely this ratio that makes painting by hand difficult — the brush has to follow a long circle right up against a broken tread, and when it slips there is nowhere to hide the mistake. Wheeled vehicles also tend to be built with richer weathering on the tires (dust, mud, worn tread edges), so the base areas have to be properly separated underneath all that. Many of these cars also carry a spare wheel mounted on the hull, where it is visible in full, from every side.

When the wheels come up in the build

On wheeled armored cars the wheels are fitted practically at the very end, because during the building and painting of the hull they are merely in the way and their pin breaks easily. The masking step therefore belongs in the closing phase: paint the wheels as a separate group, fit the masks once the base has cured and spray the tires, then add the dust weathering — and fit the finished wheels to the axles only once the hull is painted and weathered. Do the spare wheel in the same batch as the running ones, or the tire shade will not match and the difference will be obvious at first glance.

Who the set is for

  • Builders of the Marmon-Herrington armored car in 1:35 scale
  • Modelers of wheeled armored equipment
  • Those who want a clean transition between the tire tread and the rim
  • Diorama builders whose vehicle is seen close up and from every side

This is a masking accessory, not a kit. The model, paints and glue are not included in the package.

Reviews

No reviews yet Have you built this one? Tell other modellers how it went and help them choose.

Forum

Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.

Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.

There are no questions here yet. Be the first to ask!

FAQ

The contents of the package are stated on the box. The set is intended for masking the wheels of this vehicle.

There are only four wheels, but each is large and visible in full. The tire border is therefore longer and a mistake cannot be hidden.

Only once the hull has been painted and weathered. During the build they are in the way and their mounting is easily damaged.

The set is cut for the IBG kit. With a different manufacturer the wheel size may differ, so lay the mask on dry first.

Last seen

QuickwheelQW-1381:35

1:35 Marmon-Herrington - IBG

The Quickwheel masking set for the wheels of the Marmon-Herrington armored car in 1:35 scale is cut for the IBG kit.
In stock
4.76 €
HatakaHTK-AS109

Ukrainian AF Vol. 2 (Grey Pixel) Paint Set

Six gray shades for the pixel scheme of the Ukrainian Air Force. The second part of the series, this time in the gray variant of the pattern, with references to the FS, RAL and ANA standards.
In stock
13.56 €
Andy's Hobby HeadquartersAHHQ-0091:16

1:16 M113A1 / M113A1 ACAV 2 in 1 Kit

M113A1 / M113A1 ACAV is an injection-molded plastic kit of the American armored personnel carrier in 1:16 scale from the manufacturer Andy's Hobby Headquarters, with the option of building two variants from one package.
In stock
119.96 €
HäTHAT81491:72

1:72 German Pak36 Anti Tank Gun

HäT 1:72 German Pak36 Anti Tank Gun is four 37 mm anti-tank guns and sixteen crew figures.
In stock
10.36 €
1:32 Mirage 2000D/N - interior 3D decals for Kitty Hawk/Zimi models kit
-20 %
Favorite
KelikRSK32-00251:32

1:32 Mirage 2000D/N - interior 3D decals for Kitty Hawk/Zimi models kit

Kelik 1:32 - the cockpit interiors of the Mirage 2000D and 2000N is a set of 3D decals with relief that replace the laborious painting of instrument panels and side consoles. The set is prepared for Kitty Hawk and Zimi Models kits. The aircraft kit is not included.
In stock
53.56 €42.85 € You save 10.71 €
1:72 Messerschmitt Bf-109F (G early) wheels set Type 2 (weighted)
-20 %
Favorite
ReskitRS72-03501:72

1:72 Messerschmitt Bf-109F (G early) wheels set Type 2 (weighted)

The Reskit Bf 109F (early G) wheels Type 2 (weighted), 1:72 is a resin replacement wheel set for models of the Messerschmitt Bf 109F and the early G. A detailing accessory, not an aircraft kit.
In stock
5.96 €4.77 € You save 1.19 €
Landscapes of War Vol. 1-25 %Stock ClearanceFavorite
VallejoVAL75004

Landscapes of War Vol. 1

Landscapes of War Vol. 1 is a modeling publication from the Vallejo range devoted to building landscape for dioramas. It is the first part of the series.
Last one!
35.56 €26.68 € You save 8.88 €
Loading, please wait...

Setting consent to personalization

With your consent, we may use the information below for the following purposes or share it with selected partners. You can adjust your settings for individual purposes (types of processing) and confirm your choice with the "Save settings" button:

Always active

Necessary cookies

These are technical files that are necessary for the correct behavior of our website and all its functions. They are used, among other things, to store products in the shopping cart, display products on request, control filters, personal settings and also set consent to the use of cookies. Your consent is not required for these cookies and it is not possible to remove it.

Analytical cookies

They count website traffic and, by collecting anonymous statistics, enable the operator to better understand their visitors and thus constantly improve the site.

Marketing cookies

They collect information to better tailor advertising to your interests, both on and off this website.

Setting consent to personalization

To make it easier for you to browse the site, to offer you customized content or advertising, and to analyze traffic anonymously, we use cookies that we share with our partners for social media, advertising, and analytics. You can adjust their settings with the "Edit settings" link and you can change it at any time in the footer of the website. You can find more detailed information in our Policy on the protection of personal data and the use of cookies.