1:35 Olifant MK 1B MBT - Hobby Boss

1:35 Olifant Mk 1B MBT is a Quickwheel masking set for the road wheels, cut for the Hobby Boss kit. It secures a sharp transition between the rubber tire band and the rim.

Scale1:35
Manufacturer Quickwheel
Product EAN8591111000000

Responsibility details are not available.

8.76 €
7.24 € without VAT
In stock
Free shipping on orders over 1,000 czk in czech republic Personal pickup in Prostějov 14-day returns

About product

1:35 Olifant Mk 1B MBT wheel masking set (Hobby Boss)

A set of masks intended for painting the road wheels of the South African Olifant Mk 1B main battle tank. It is not a kit or a resin replacement wheel, but an aid that shields the rim on the model and leaves only the rubber tire band exposed. The cut matches the wheels from the Hobby Boss kit, which is why the target kit is given in the name with this range.

What makes the running gear of this subject special

The Olifant comes from the line of the British Centurion and carries six large rubber-tired road wheels on each side, that is, twelve on the whole model. That is a great many surfaces to line with a brush and just as many opportunities for a hand to waver. The essential point is that the upper run of the track and a considerable part of the running gear disappear behind side plates. Only a strip above the ground stays visible, along with what shows through the gaps, so it pays to concentrate on the outer faces of the wheels and on the lower edge, which the viewer will see from every angle. The inner faces of the wheels deserve at least a rough base coat, because they are seen through the wheel well.

What comes after unmasking

The Olifant served in a dry, dusty environment and that is the clue for the whole weathering. Once the mask is off, first pick out the edge between tire band and rim with a dark wash, which will also run up to the bolts of the rim. Then comes light pigment dust, applied mainly to the underside of the hull, into the inner space behind the plates and into the places where fine sand would collect. Mud in the form of thick cakes suits this less well than a fine deposit. The running surface of the tire band wears to a lighter shade, so go over it lightly with a dry brush around the outer circumference, so the wheel does not look fresh from the factory.

Who the set is for

  • Builders of modern African and British tanks in 1:35 scale
  • For modelers who want twelve identical-looking wheels with no lining by hand
  • For builds with dusty desert weathering
  • For those who paint with an airbrush and need a clean dividing edge

Paints, glue and the kit itself are not included in the package. Check before ordering that your kit matches the one the set is cut for.

Reviews

No reviews yet Have you built this one? Tell other modellers how it went and help them choose.

Forum

Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.

Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.

There are no questions here yet. Be the first to ask!

FAQ

It covers the rim of the road wheel so that only the rubber tire band can be sprayed and the transition is sharp.

Yes. The plate hides the upper run of the track, but the lower strip of the wheels and the gaps between the plates stay visible, and unfinished wheels leap out there.

Practically always before seating them in the hull. Between six wheels on a side there is no longer room for comfortable work.

That is not stated here. The cut matches the wheels of the kit named; with a different molding the size may differ.

Last seen

QuickwheelQW-2321:35

1:35 Olifant MK 1B MBT - Hobby Boss

1:35 Olifant Mk 1B MBT is a Quickwheel masking set for the road wheels, cut for the Hobby Boss kit. It secures a sharp transition between the rubber tire band and the rim.
In stock
8.76 €
Mettalic DetailsMDR48501:48

1:48 Torpedo Mk.54 x 2 for helicopters

1:48 Torpedo Mk.54 for helicopters, a pair is a resin accessory from Metallic Details. It serves to equip a finished model of a carrier helicopter; it is not a kit.
In stock
13.96 €
AK interactiveAKMAGNET020

OVAL MAGNET FOR BASES 105X70MM (6 units)

Six oval magnets 105x70 mm for wide bases, busts and smaller diorama boards.
In stock
3.56 €
AberABR351491:35

1:35 German Nebelkraftwagen Sd.Kfz. 11/4 - vol. 1 - basic set

A photo-etched detail set, Nebelkraftwagen Sd.Kfz. 11/4 - vol. 1, basic set , in 1:35 scale from Aber. A metal accessory for a more faithful build of the German half-track vehicle, not a standalone model.
In stock
17 €
1:48 R-27ER - AA-10 Alamo C (2 pcs)-25 %Stock ClearanceFavorite
AMMO of Mig JimenezA.MIG-110391:48

1:48 R-27ER - AA-10 Alamo C (2 pcs)

The extended version of the Soviet missile 1:48 R-27ER - AA-10 Alamo C by AMMO of Mig Jimenez, stores for models of the MiG-29 and the Su-27 in 1:48 scale.
4 leftof 5
15.16 €11.36 € You save 3.80 €
Kovozávody ProstějovKPM05391:72

1:72 PA-18C „Super Cub“ Military

An injection-molded plastic kit of the Piper PA-18C Super Cub Military in 1:72 scale from the manufacturer Kovozavody Prostejov: the military version of a light piston-engined aircraft for observation, liaison and towing.
In stock
15.96 €
Mf zoneMFZ-P371:24

1:24 Hose Connectors Long 0.5mm (10pcs)

Hose connectors long 0.5 mm - 10 pieces is a set of 3D printed scale connectors in an extended version for 0.5 mm hoses, for detailing the engines of models in 1:24 scale from Mf zone.
In stock
25.56 €
Loading, please wait...

Setting consent to personalization

With your consent, we may use the information below for the following purposes or share it with selected partners. You can adjust your settings for individual purposes (types of processing) and confirm your choice with the "Save settings" button:

Always active

Necessary cookies

These are technical files that are necessary for the correct behavior of our website and all its functions. They are used, among other things, to store products in the shopping cart, display products on request, control filters, personal settings and also set consent to the use of cookies. Your consent is not required for these cookies and it is not possible to remove it.

Analytical cookies

They count website traffic and, by collecting anonymous statistics, enable the operator to better understand their visitors and thus constantly improve the site.

Marketing cookies

They collect information to better tailor advertising to your interests, both on and off this website.

Setting consent to personalization

To make it easier for you to browse the site, to offer you customized content or advertising, and to analyze traffic anonymously, we use cookies that we share with our partners for social media, advertising, and analytics. You can adjust their settings with the "Edit settings" link and you can change it at any time in the footer of the website. You can find more detailed information in our Policy on the protection of personal data and the use of cookies.