1:35 PHONE BOX FOR M46, 47, 48 AND M48A1 WITH INTERIOR

1:35 PHONE BOX FOR M46, 47, 48 AND M48A1 WITH INTERIOR

9.56 €
Add to Cart

1:35 PHONE BOX FOR M46, 47, 48 AND M48A1 WITH INTERIOR

A phone box with interior for the M46, M47, M48 and M48A1, 1:35 is a resin detail accessory from the manufacturer Elefant. According to the name it has the interior modeled as well, so it can be built open.

Scale1:35
Manufacturer ELEFANT
Product EAN8591111000000

Responsibility details are not available.

9.56 €
7.90 € without VAT
In stock
Free shipping on orders over 1,000 czk in czech republic Personal pickup in Prostějov 14-day returns

About product

Phone box with interior, 1:35

A resin accessory for American tracked equipment in 1:35 scale from the manufacturer Elefant. It is not a vehicle kit but a standalone phone box for models of the M46, M47, M48 and M48A1. The name of the product expressly states that the part has the interior worked out, which is the key point with an accessory of this kind.

What the accessory is for

The box served to let accompanying infantry communicate with the crew shut inside the vehicle. On a model it is a small but prominent element on the outer surface. A kit usually treats it as a blind block with the door suggested. A resin casting with the interior modeled makes it possible to build the box with the door open, so that you can see inside. That is exactly the kind of detail that catches the eye on a finished model, because it shows that the builder dealt even with what was not strictly necessary.

Building and painting tips

Reverse the usual order: paint and weather the inside of the box before you glue the part to the hull. Afterwards you will reach inside with a brush only with difficulty. First wash the casting in warm water with detergent, separate it from the casting block with a fine saw and level the surface. Use a light shade of primer, so that the inner walls do not get lost in shadow. The outside takes the shade of the vehicle, while the inside is rewarding to distinguish with a darker tone and a fine wash. The box is glued with cyanoacrylate glue, and for the door a drop applied with a pin is enough. If you decide on a closed door, pay attention to the fine gap around its edge; it is that which gives the impression of a working closure.

Who the accessory is for

  • builders of American postwar tracked equipment in 1:35 scale
  • modelers who want an open detail instead of a blind plastic block
  • dioramas with infantry beside the vehicle
  • more advanced builders used to resin and to painting small interiors

The accessory is supplied unassembled and unpainted. Glue, paints and the base kit are not included in the package.

Reviews

No reviews yet Have you built this one? Tell other modellers how it went and help them choose.

Forum

Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.

Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.

There are no questions here yet. Be the first to ask!

FAQ

It let accompanying infantry communicate with the crew inside the closed-up vehicle.

The part has the inner space of the box modeled as well, so it can be built with the door open and you will see inside.

The number of parts is stated on the box of the set.

First paint and weather the inside, and only then glue the box to the hull and finish the outside.

Last seen

ELEFANTEL350891:35

1:35 PHONE BOX FOR M46, 47, 48 AND M48A1 WITH INTERIOR

A phone box with interior for the M46, M47, M48 and M48A1, 1:35 is a resin detail accessory from the manufacturer Elefant. According to the name it has the interior modeled as well, so it can be built open.
In stock
9.56 €
ReskitRS72-03371:72

1:72 BRU-3A bomb racks for Aardvark (2 pcs) F-111

Reskit 1:72 BRU-3A bomb racks for the F-111 is a pair of 3D-printed resin multiple bomb racks. It is an upgrade accessory, not an airplane model.
In stock
8.36 €
Art ScaleASKM350081:35

1:35 AH-64D/E double-sided mask with inside white rubber mask for Tacom

Double-sided masking templates for the glazing of the AH-64D/E attack helicopter in 1:35 scale. The inner part of the set is made of white rubber.
In stock
11.96 €
EduardED6240081:24

1:24 Bf-109 G-5 / G-6 - Wheels Set (3D-Printed / for Airfix Kits)

3D printed wheels for the Bf 109G-5/G-6 1:24 from Eduard, a set of replacement wheels for the large Messerschmitt Bf 109G kit. It is not a model but a detail accessory for experienced modelers. Target kit: Airfix.
In stock
13.80 €
ItaleriIT39641:24

1:24 Iveco TURBOSTAR 190.48 reefer truck

The Iveco TurboStar 190.48 is a plastic kit of the Italian semi-trailer tractor with a refrigerated semi-trailer in the large 1:24 scale from Italeri.
In stock
59.56 €
Loading, please wait...

Setting consent to personalization

With your consent, we may use the information below for the following purposes or share it with selected partners. You can adjust your settings for individual purposes (types of processing) and confirm your choice with the "Save settings" button:

Always active

Necessary cookies

These are technical files that are necessary for the correct behavior of our website and all its functions. They are used, among other things, to store products in the shopping cart, display products on request, control filters, personal settings and also set consent to the use of cookies. Your consent is not required for these cookies and it is not possible to remove it.

Analytical cookies

They count website traffic and, by collecting anonymous statistics, enable the operator to better understand their visitors and thus constantly improve the site.

Marketing cookies

They collect information to better tailor advertising to your interests, both on and off this website.

Setting consent to personalization

To make it easier for you to browse the site, to offer you customized content or advertising, and to analyze traffic anonymously, we use cookies that we share with our partners for social media, advertising, and analytics. You can adjust their settings with the "Edit settings" link and you can change it at any time in the footer of the website. You can find more detailed information in our Policy on the protection of personal data and the use of cookies.