1:35 PLUG FOR DRIVES FOR M46/47/48/60, CONTAINS 96 PCS.

1:35 PLUG FOR DRIVES FOR M46/47/48/60, CONTAINS 96 PCS.

5.16 €
Add to Cart

1:35 PLUG FOR DRIVES FOR M46/47/48/60, CONTAINS 96 PCS.

ELEFANT 1:35 Plugs for the drive sprockets of the M46, M47, M48 and M60 is a resin accessory with 96 small plugs in 1:35 scale. It is a detail set for a kit, not a vehicle model.

Scale1:35
Manufacturer ELEFANT
Product EAN8591111000000

Responsibility details are not available.

5.16 €
4.26 € without VAT
In stock
Free shipping on orders over 1,000 czk in czech republic Personal pickup in Prostějov 14-day returns

About product

Plugs for the drive sprockets of the M46, M47, M48 and M60, 1:35 scale, ELEFANT

The package contains 96 small resin plugs for further detailing of the running gear of the American M46, M47, M48 and M60 series tanks in 1:35 scale. It is not a kit but an accessory that improves areas which are clearly visible from the side and from below once a model is finished.

Working in series and how to make it easier

A quantity of parts like this is not done one at a time at random but in batches. The proven approach is to prepare ten to fifteen pieces at once, cut them off, clean them up and only then move on to gluing, so that your hand keeps the same rhythm and all the plugs sit at the same depth. A pad of modeling putty, into which you push the parts face up, also helps, as does a magnetic or at least a deep dish from which a small casting cannot jump out. With a repeated detail, evenness matters more than the absolute accuracy of a single piece, because the eye takes in the whole row at once.

Usage and painting tips

Before gluing, pre-drill the holes with a micro drill so that the plug drops in without pressure; resin tears when forced in. Wash the parts in lukewarm water with detergent and glue them with cyanoacrylate glue applied with a pin, with the gel version giving a few seconds more to true up the position. Deal with the painting only after gluing and after spraying the primer, otherwise the shade of the plugs and of their surroundings will never match. At the end it pays to add dust pigment or mud around the drive sprockets, because that is where dirt builds up most on real vehicles.

Who the set is for

  • Builders of American postwar tanks in 1:35 scale
  • Modelers who finish running gear in detail
  • Those who work on several models at once and will use a large package
  • More experienced builders with experience of micro drilling and resin

The accessory is supplied unpainted and without the base kit. Glue, paints and tools are not included in the package.

Reviews

No reviews yet Have you built this one? Tell other modellers how it went and help them choose.

Forum

Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.

Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.

There are no questions here yet. Be the first to ask!

FAQ

According to the name it contains 96 pieces. It is a repeated small detail that occurs many times on one vehicle, so a large package covers several models and leaves a margin.

We recommend it. A resin plug forced into a tight hole easily snaps off, whereas into a pre-drilled hole it drops in effortlessly and holds with a drop of glue.

The number of positions differs between types. Count how many places on your model you want to fit before building.

After gluing, together with the surrounding surface and over primer. Painting the individual plugs beforehand leads to a different shade from their surroundings.

Last seen

ELEFANTEL351911:35

1:35 PLUG FOR DRIVES FOR M46/47/48/60, CONTAINS 96 PCS.

ELEFANT 1:35 Plugs for the drive sprockets of the M46, M47, M48 and M60 is a resin accessory with 96 small plugs in 1:35 scale. It is a detail set for a kit, not a vehicle model.
In stock
5.16 €
ELEFANTELE351421:35

1:35 GERMAN HOOKS SET FOR PZ. III TURRET, 49 PCS.

ELEFANT, a set of hooks for the Pz.III turret, 49 pieces (1:35) is a resin set of turret hooks for a convincing refinement of models of the German Panzer III tank.
In stock
5.16 €
KelikRSK72-01551:72

1:72 F4U-1A Corsair - interior 3D decals for Tamiya kit

1:72 F4U-1A Corsair – 3D interior decals are colored self-adhesive 3D decals for a detailed rendition of the cockpit of the famous carrier fighter in 1:72 scale. Intended for Tamiya kits.
In stock
10.36 €
Aires/QuickboostQB488851:48

1:48 MiG-25 Foxbat air ramps sensors

Quickboost 1:48 MiG-25 Foxbat air ramps sensors are resin sensors for the intake ramps of a model of the Soviet high-speed aircraft in 1:48 scale.
In stock
4.76 €
MiniartMA352931:35

1:35 T-34/85 w/D-5T PLANT 112. SPRING 1944

The T-34/85 with the D-5T gun, plant 112, spring 1944, 1:35 is a plastic kit of the Soviet medium tank from MiniArt. The model is supplied unassembled and unpainted.
In stock
44.36 €
EduardED6489901:48

1:48 P-51B/P-51C Mustang wheels diamond tread 2

P-51B/P-51C Mustang wheels diamond tread 2 (1:48) is a resin set of main wheels with a diamond tire tread pattern for models of the P-51B/C Mustang fighter.
In stock
6.80 €
Dead DesignVM320471:32

1:32 J2M3/ 5 Nat. Ins. w/ o White Outline

Masking of the national insignia for the Mitsubishi J2M3 and J2M5 Raiden in 1:32 scale in the version without a white outline.
In stock
9.16 €
Dead DesignUC480701:48

1:48 Gloster Meteor NF.14 - Under Carriage Bays (for Sword Kits)

A set of shaped films for the landing gear spaces of the Gloster Meteor NF.14 night fighter in 1:48 scale, cut according to the name for the Sword kit.
In stock
5.96 €
Dead DesignNM481601:48

1:48 SR-71 Blackbird - canopy frame paint mask (double sided) for Revell

A double-sided frame mask for the SR-71 Blackbird : pieces for the inner and the outer face of the glazing, 1:48 scale.
In stock
10.76 €
Loading, please wait...

Setting consent to personalization

With your consent, we may use the information below for the following purposes or share it with selected partners. You can adjust your settings for individual purposes (types of processing) and confirm your choice with the "Save settings" button:

Always active

Necessary cookies

These are technical files that are necessary for the correct behavior of our website and all its functions. They are used, among other things, to store products in the shopping cart, display products on request, control filters, personal settings and also set consent to the use of cookies. Your consent is not required for these cookies and it is not possible to remove it.

Analytical cookies

They count website traffic and, by collecting anonymous statistics, enable the operator to better understand their visitors and thus constantly improve the site.

Marketing cookies

They collect information to better tailor advertising to your interests, both on and off this website.

Setting consent to personalization

To make it easier for you to browse the site, to offer you customized content or advertising, and to analyze traffic anonymously, we use cookies that we share with our partners for social media, advertising, and analytics. You can adjust their settings with the "Edit settings" link and you can change it at any time in the footer of the website. You can find more detailed information in our Policy on the protection of personal data and the use of cookies.