A resin correction part 1:35, the rear hull armor of the Pz.Kpfw. III from CMK replaces the corresponding part of a kit with a more accurate casting.
Responsibility details are not available.
This is a resin accessory part, not a kit of a tank. It replaces the rear armor plate of the hull, that is the surface at the rear of the vehicle above the running gear, with a more accurately shaped casting. So-called correction parts are made where the shape or thickness of a part in the original kit departs from the subject and where cutting it out and replacing it puts that right faster than a conversion.
The rear of the hull is a surface on a tank that everyone who walks around the model looks at; it carries the exhausts, access hatches and mounting features and has a lot of straight edges on which an inaccuracy shows. A resin casting holds sharper edges and cleaner relief than an injected part, which has to respect the direction of ejection from the mold. Given the extent of the operation, this is a modification for a modeler who is prepared to cut into the hull.
First wash the casting in lukewarm water with detergent. Cut the casting block off with a saw and level the surface on abrasive paper laid on glass, as with a flat part this is what decides how the joint finally sits. Sand wet and with respiratory protection. Before you start cutting into the hull, lay the casting on dry and scribe the exact place of the cut; take material off the hull bit by bit and keep testing. It is glued with cyanoacrylate glue, if need be with a little acrylic putty in the joint. Apply the base over the whole joint at once, so that the transition between materials is not visible in the paint.
The part is an accessory, not a stand-alone model. It is supplied unassembled and unpainted; glue, paints and the base kit are not included in the package, unless stated otherwise. Before buying, check that the part matches your kit.
Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.
Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.
There are no questions here yet. Be the first to ask!