1:35 Sd.Kfz. 171 Panther A/D grille for Meng kit

1:35 Sd.Kfz. 171 Panther A/D grille for Meng kit

8.76 €
Add to Cart

1:35 Sd.Kfz. 171 Panther A/D grille for Meng kit

1:35 Sd.Kfz. 171 Panther Ausf. A/D — photo-etched grille is an accessory for the engine deck of a tank model. It is not a model of the vehicle but a set for refining the detail. Intended for the Meng kit.

Scale1:35
Manufacturer SBS Model
Product EAN8591111000000

Responsibility details are not available.

8.76 €
7.24 € without VAT
In stock
Free shipping on orders over 1,000 czk in czech republic Personal pickup in Prostějov 14-day returns

About product

Photo-etched grille for the Panther Ausf. A and D, 1:35 scale

An accessory for modelers, not a kit of the vehicle. The set holds photo-etched parts in thin metal sheet that replace the thick plastic imitation of the grille on the engine deck. The photo-etched part has a realistic thickness and is see-through into the inside of the hull, which injection-molded plastic never achieves. The accessory is supplied by the SBS Model brand and is intended for the Ausf. A and Ausf. D versions. The set is intended for the Meng kit.

The real subject

Sd.Kfz. 171 is the service designation of the German Panther medium tank of the Second World War. The Ausf. D version was the first production form and the Ausf. A followed on from it; both share a number of features of the engine deck layout, among them the grilles over the radiators. These grilles are among the most conspicuous places on the model where the thickness of the plastic shows.

Usage tips

Cut the photo-etched parts off on a hard surface with a sharp scalpel or photo-etch scissors, not by breaking them out. Make the bends in a bending tool or between two blades held up to the fold line. Degrease the sheet with alcohol before gluing. It is glued with cyanoacrylate applied with a pin in a minimal amount; on larger surfaces two-part epoxy is safer. Apply a metal primer to the metal, otherwise the finish will peel while you handle it. The original plastic grille usually has to be sanded flush; the procedure differs according to the kit used, so dry-fit the part first.

Who the accessory is for

  • Builders of German armor in 1:35 scale
  • Modelers who are bothered by a thick plastic imitation of grilles
  • Those building the Ausf. A or Ausf. D version
  • More experienced builders with experience of photo-etched parts

The accessory is supplied unpainted and is not a model in its own right. The base kit, glue and paints are not included in the package. The set is cut for one particular kit, so please check the fit with yours before buying.

Reviews

No reviews yet Have you built this one? Tell other modellers how it went and help them choose.

Forum

Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.

Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.

There are no questions here yet. Be the first to ask!

FAQ

It is not. It is a photo-etched accessory for the engine deck. The kit of the vehicle has to be bought separately.

Not necessarily. Photo-etched grilles are cut to the outline of one particular kit, so check the fit with the one you are building before buying.

They are glued with cyanoacrylate in a minimal amount or with epoxy, and painted over a primer meant for metal.

The number of parts is stated on the box.

Last seen

SBS ModelSBS350391:35

1:35 Sd.Kfz. 171 Panther A/D grille for Meng kit

1:35 Sd.Kfz. 171 Panther Ausf. A/D — photo-etched grille is an accessory for the engine deck of a tank model. It is not a model of the vehicle but a set for refining the detail. Intended for the Meng kit.
In stock
8.76 €
PolákPOL5234K

Štěrk vel. 0 - Rohovec šedohnědý - 1kg

Ballast size 0 - Gray-brown chert - 1 kg is crushed natural stone in a gray-brown tone for ballast beds, roads and diorama terrain. A 1 kg package, made by Polak.
In stock
5.56 €
TamiyaTA87012

Tamiya Cement ( 20ml ) - Lepidlo na plast.modely se štětečkem

The classic liquid cement for plastic Tamiya Cement with a brush in the cap, 20 ml package. It dissolves the surface of polystyrene and creates a strong, lasting joint.
In stock
3.16 €
MN-hobby72F0051:72

1:72 Strážník unimoformované protektorátní policie 1944

A constable of the uniformed Protectorate police, 1944 , is a small resin figure in 1:72 scale by MN-hobby.
In stock
2.36 €
1:32 Albatros D.I 3D-Printed & coloured Interior on decal paper-25 %Stock ClearanceFavorite
Quinta StudioQD320761:32

1:32 Albatros D.I 3D-Printed & coloured Interior on decal paper

The Albatros D.I, a 3D printed color interior on decal paper in 1:32 scale from Quinta Studio carries the textures of wood and leather over without painting.
Last one!
23.56 €17.68 € You save 5.88 €
Mr.PaintMRPC002

FORD GT GULF Orange {Heritage Edition}

Ford GT Gulf Orange (Heritage Edition) is a modeling lacquer paint ready to spray with an airbrush, in the authentic shade of Gulf racing orange.
In stock
5.96 €
New WareNWAM00731:48

1:48 Grumman F-14A TomcatEXPERT kabuki masks

Pre-cut painting masks of kabuki paper tape for a model of the Grumman F-14A Tomcat in 1:48 scale, in the version marked EXPERT.
In stock
7.96 €
Kits-WorldKW320891:32

1:32 Boeing B-17F-27-BO 'Knock-out Dropper'

Decals 1:32 for the Boeing B-17F in the finish of the machine that was the first bomber of the Eighth Air Force to complete its fiftieth combat mission. The raid from the fall of 1943, Molesworth base.
In stock
11.96 €
Artwox ModelAM200131:700

1:700 Light Cruiser ChungKing Deck Masking Sheet for Flyhawk kit 1111

Artwox Model 1:700 a masking template for the deck of the light cruiser Chungking is a self-adhesive pre-cut mask for spraying the deck areas. It contains no wood veneer; it is an aid for painting the Flyhawk 1111 kit.
In stock
3.96 €
Plastruct PLT90004

Angle (1pcs) H 3.2, W 3.2, T 0.8, L 375 mm

The Plastruct angle is a precise plastic L section 3.2 x 3.2 mm across and 375 mm long for modeling structures and frames.
In stock
1.80 €
Loading, please wait...

Setting consent to personalization

With your consent, we may use the information below for the following purposes or share it with selected partners. You can adjust your settings for individual purposes (types of processing) and confirm your choice with the "Save settings" button:

Always active

Necessary cookies

These are technical files that are necessary for the correct behavior of our website and all its functions. They are used, among other things, to store products in the shopping cart, display products on request, control filters, personal settings and also set consent to the use of cookies. Your consent is not required for these cookies and it is not possible to remove it.

Analytical cookies

They count website traffic and, by collecting anonymous statistics, enable the operator to better understand their visitors and thus constantly improve the site.

Marketing cookies

They collect information to better tailor advertising to your interests, both on and off this website.

Setting consent to personalization

To make it easier for you to browse the site, to offer you customized content or advertising, and to analyze traffic anonymously, we use cookies that we share with our partners for social media, advertising, and analytics. You can adjust their settings with the "Edit settings" link and you can change it at any time in the footer of the website. You can find more detailed information in our Policy on the protection of personal data and the use of cookies.