20% OFF SELECTED BRANDS! EDUARD, KINETIC, SPECIAL HOBBY, CMK & more

1:35 US ARMY M1114 HUMVEE Interim Add Amour

An E.T. Model photo-etched set in 1:35 for the American M1114 HUMVEE with interim add-on armor refines the metal plates, grilles and brackets. It is an addition to a kit, not a model of the vehicle.

Scale1:35
Manufacturer E.T. Model
Product EAN8591111732994

Responsibility details are not available.

15.56 €
12.86 € without VAT
In stock
Free shipping on orders over 1,000 czk in czech republic Personal pickup in Prostějov 14-day returns

About product

Photo-etched set for the M1114 HUMVEE with add-on armor 1:35: E.T. Model

A detailing set in photo-etched metal in 1:35 scale for a model of the American M1114 HUMVEE armored utility vehicle fitted with interim add-on armor. The set replaces the plastic rendering where its thickness shows most: on the add-on plates, the grilles, the hinges, the brackets and the small external equipment. It is not a kit of the vehicle; it is an accessory that is fitted to a model already built or under construction.

The real subject

The HUMVEE is an American light utility vehicle which took hold in the army as a universal carrier of everything from signals equipment to weapon stations. The M1114 version is the factory armored variant with strengthened crew protection. The interim add-on armor, which appeared in response to combat experience in an environment with a high risk of improvised explosive devices, consisted of armor plates and covers fitted after the fact, often visibly improvised-looking assemblies that give the vehicle its characteristic angular look. It is precisely these additions that are the most interesting from a modeling point of view and that benefit most from a metal rendering.

Tips for working and painting

The add-on armor plates are flat by their nature and must not be bowed, so separate them with a scalpel and straighten them on glass. Make the bends in a bending tool. Degrease the metal with alcohol and glue it with cyanoacrylate glue, and on large areas with epoxy. A base coat for metal is essential. When painting, it pays to suggest that the add-on armor was fitted later: it may have a slightly different shade or more scuffed edges than the original body. Dusty lower areas, worn edges of the doors and the marks of boots on the step surfaces do more on this type of vehicle than any complicated weathering.

Who the set is for

  • Modelers of modern American equipment and of contemporary conflicts
  • Those who want to achieve a scale thickness of sheet on the add-on armor
  • Builders of dioramas with the vehicle at the front of the scene
  • More experienced modelers with experience of bending and gluing photo-etched parts

This is an accessory photo-etched set, not a model in its own right. The kit, glue and paints are not included in the package, unless stated otherwise.

Reviews

No reviews yet Have you built this one? Tell other modellers how it went and help them choose.

Forum

Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.

Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.

There are no questions here yet. Be the first to ask!

FAQ

Armor plates and covers fitted after the fact, with which vehicles were brought up to standard in response to combat experience, until factory solutions were available.

No. It is a photo-etched detailing set intended to improve a plastic kit of the M1114 in 1:35 scale.

Separate them with a scalpel on a hard surface and straighten any bowing on glass. Do not nip them off with cutters.

Yes. Degrease the metal with alcohol and spray it with a base coat for metal surfaces, otherwise the paint will chip during handling.

Last seen

E.T. ModelE35-0791:35

1:35 US ARMY M1114 HUMVEE Interim Add Amour

An E.T. Model photo-etched set in 1:35 for the American M1114 HUMVEE with interim add-on armor refines the metal plates, grilles and brackets. It is an addition to a kit, not a model of the vehicle.
In stock
15.56 €
NochNOCH07442

Přírodní jezírko s travou

Noch Natural pond with grass is a ready-made scenic feature - a small pond with grassy banks for livening up dioramas and model railroad layouts.
In stock
19.96 €
U-STARUA91250

Modeling Scissor for photo-etched parts

The U-STAR scissors for photo-etched parts are small precise scissors with a fine point for cutting photo-etched parts.
In stock
18.36 €
1:32 Luftwaffe mechanic personnel 1940-45 N°5
-20 %
Favorite
Black Dog modelBDF321231:32

1:32 Luftwaffe mechanic personnel 1940-45 N°5

The figure 1:32 Luftwaffe mechanic personnel 1940-45 N°5 from Black Dog represents a German aircraft mechanic in 1:32 scale. It belongs to the numbered line of ground personnel.
In stock
14.36 €11.49 € You save 2.87 €
Dead DesignVM481151:48

1:48 Ki-61 Iabc Hien In and Out

Shaped masks for a model of the Kawasaki Ki-61-I Hien in 1:48 scale, for the outer as well as the inner side of the clear parts. They are applied before spraying.
In stock
8.76 €
1:32 A-7D Corsair II ejection seat with safety belts
-20 %
Favorite
Aires/QuickboostQB321471:32

1:32 A-7D Corsair II ejection seat with safety belts

A-7D Corsair II ejection seat with safety belts is a resin ejection seat with belts in 1:32 scale from Quickboost. A detail accessory, not the whole model.
In stock
4.76 €3.81 € You save 0.95 €
LifecolorLIFUA124

UA124 - Japan Greygreen a5 FS35414

Japan Greygreen A5 FS35414 is a Lifecolor acrylic modeling paint. A cool gray-green that serves in a diorama on weathered wood in shadow, on lichen and on stone with a hint of damp.
In stock
2.76 €
1:32 F-16 Fighting Falcon gun barrels
-20 %
Favorite
Aires/QuickboostQB321341:32

1:32 F-16 Fighting Falcon gun barrels

A resin detail of the barrel of the on-board cannon for the F-16 Fighting Falcon in 1:32 scale from Quickboost. It replaces the plastic part from the kit with a sharper casting.
In stock
4.76 €3.81 € You save 0.95 €
BrengunBRL480031:48

1:48 British 500lb bomb with bomb rack

A British 500-pound bomb with its rack, 1:48 scale , is a resin accessory for an aircraft model, not a kit. It serves to complete a carried store on a model of a British aircraft.
In stock
10.80 €
Loading, please wait...

Setting consent to personalization

With your consent, we may use the information below for the following purposes or share it with selected partners. You can adjust your settings for individual purposes (types of processing) and confirm your choice with the "Save settings" button:

Always active

Necessary cookies

These are technical files that are necessary for the correct behavior of our website and all its functions. They are used, among other things, to store products in the shopping cart, display products on request, control filters, personal settings and also set consent to the use of cookies. Your consent is not required for these cookies and it is not possible to remove it.

Analytical cookies

They count website traffic and, by collecting anonymous statistics, enable the operator to better understand their visitors and thus constantly improve the site.

Marketing cookies

They collect information to better tailor advertising to your interests, both on and off this website.

Setting consent to personalization

To make it easier for you to browse the site, to offer you customized content or advertising, and to analyze traffic anonymously, we use cookies that we share with our partners for social media, advertising, and analytics. You can adjust their settings with the "Edit settings" link and you can change it at any time in the footer of the website. You can find more detailed information in our Policy on the protection of personal data and the use of cookies.