1:350 HMS Tiger Battle Cruiser 1914 (For Combrig 3534FH,3534WL)

1:350 HMS Tiger Battle Cruiser 1914 (For Combrig 3534FH,3534WL)

31.16 €
Add to Cart

1:350 HMS Tiger Battle Cruiser 1914 (For Combrig 3534FH,3534WL)

A 1:350 wooden deck for the battlecruiser HMS Tiger (Artwox Model) is an adhesive veneer with pre-printed planks, cut for a model of the ship in her 1914 form.

Scale1:350
Manufacturer Artwox Model
Product EAN8591111000000

Responsibility details are not available.

31.16 €
25.75 € without VAT
In stock
Free shipping on orders over 1,000 czk in czech republic Personal pickup in Prostějov 14-day returns

About product

A 1:350 wooden deck for a model of the battlecruiser HMS Tiger by Artwox Model

This is not a kit but an aftermarket accessory. The veneer with a pre-printed pattern of planks and an adhesive back replaces the engraved plastic deck and gives the model a real wooden texture. The set is cut for one specific kit, the Combrig 3534FH; with that kit the name also lists more than one release variant, so check which of them you have at home.

Lining it up by reference points

Before you touch the protective film, lay the veneer on dry and find a pair of points on the plastic deck that you will watch while settling it: usually the openings or the outlines of the barbettes of the gun turrets and the bases of the masts are best. These are cut accurately in the outline and will tell you immediately whether the piece is shifted or rotated. Make this check in good light and from eye level, not at an angle, because from the side even a crookedly laid piece looks all right. On a large battlecruiser the deck is long, and even a small deviation at the bow shows up at the stern as a visible wander of the planks.

Gluing, trimming, varnish

Level the base with fine abrasive paper and degrease it. Expose the film in sections, press the veneer down with a soft cloth and work from the place where it already holds toward the free edge. Cut the overhangs off with a sharp knife run along the edge of the plastic, changing the blade as you go. The shade can be adjusted with wood stain, and a thin coat of matte varnish provides the finish. Leave the model to dry undisturbed before further assembly so that the veneer does not lift where its edge meets the superstructure.

Who the set is for

  • The builder of a model of the British battlecruiser HMS Tiger in 1:350 scale.
  • The modeler who takes care over settling the piece accurately.
  • Those interested in large warships from the beginning of the twentieth century.
  • Anyone looking for a deck surface unattainable by ordinary painting of plastic.

This is an accessory for a plastic kit, not a standalone model. The kit, paints and glue are not included in the package, unless stated otherwise.

Reviews

No reviews yet Have you built this one? Tell other modellers how it went and help them choose.

Forum

Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.

Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.

There are no questions here yet. Be the first to ask!

FAQ

No. It is a wooden deck, that is, an accessory for a plastic kit, which has to be bought separately.

The manufacturer has intended the set for several releases of the same model. Check which release you have before you buy, so that the outline of the deck matches.

By the cutouts for the barbettes of the gun turrets and the bases of the masts. Check from eye level, not from the side: at an angle even a crookedly laid piece looks straight.

Almost always the cause is imperfectly degreased or uneven plastic. The base therefore has to be sanded flat and freed of grease before gluing.

Last seen

Artwox ModelAW100731:350

1:350 HMS Tiger Battle Cruiser 1914 (For Combrig 3534FH,3534WL)

A 1:350 wooden deck for the battlecruiser HMS Tiger (Artwox Model) is an adhesive veneer with pre-printed planks, cut for a model of the ship in her 1914 form.
In stock
31.16 €
OmaskOMK748201:48

1:48 F-86F Sabre wheel bay plugs (for Hasegawa)

Omask Wheel Bay Plugs F-86F Sabre 1:48 are foam masking fillers for the landing gear bays that protect the inside of the bays from overspray while painting.
In stock
3.20 €
Nunu ModelsPN240281:24

1:24 Audi Hong Kong R8 GT-3 2015 Macau World Cup

1:24 Audi Hong Kong R8 GT-3 2015 Macau World Cup is a plastic kit from the brand Nunu Models capturing the racing Audi R8 GT3 in the form for the race at Macau in 2015.
In stock
45.96 €
MASTERAM1440261:144

1:144 Mikoyan MiG-15 - gun barrels, antenna base & Pitot Tube

A set of turned brass gun barrels, an antenna base and a Pitot tube for MiG-15 models in 1:144 scale. An accurate metal accessory that replaces the less successful plastic parts from a kit.
In stock
6.76 €
CMKCMK42541:48

1:48 Junkers Ju 88A - Bulkhead with radio sets for MG 15 position for Dragon

A resin bulkhead with radio equipment for the Junkers Ju 88A in 1:48 scale completes the inside of the fuselage behind the upper gun position. It is a detail accessory for a kit, not a model of the aircraft. The target kit is Dragon.
In stock
4.76 €
DN ModelsDN32/827-0121:32

1:32 RAM Panels Paint Masks For Italeri F-35A Lightning II

1:32 RAM Panels Paint Masks For Italeri F-35A Lightning II is a three-sheet set of stencils for the outlines of the radar-absorbent panels of the American stealth fighter in 1:32 scale.
In stock
35.16 €
Loading, please wait...

Setting consent to personalization

With your consent, we may use the information below for the following purposes or share it with selected partners. You can adjust your settings for individual purposes (types of processing) and confirm your choice with the "Save settings" button:

Always active

Necessary cookies

These are technical files that are necessary for the correct behavior of our website and all its functions. They are used, among other things, to store products in the shopping cart, display products on request, control filters, personal settings and also set consent to the use of cookies. Your consent is not required for these cookies and it is not possible to remove it.

Analytical cookies

They count website traffic and, by collecting anonymous statistics, enable the operator to better understand their visitors and thus constantly improve the site.

Marketing cookies

They collect information to better tailor advertising to your interests, both on and off this website.

Setting consent to personalization

To make it easier for you to browse the site, to offer you customized content or advertising, and to analyze traffic anonymously, we use cookies that we share with our partners for social media, advertising, and analytics. You can adjust their settings with the "Edit settings" link and you can change it at any time in the footer of the website. You can find more detailed information in our Policy on the protection of personal data and the use of cookies.