29.–30. 10. z technických důvodů zavřeno. / Closed 29–30 October for technical reasons.

1:48 AGM-62 Walleye I Mk.I

Eduard 1:48 AGM-62 Walleye I Mk.I is a resin accessory representing the American guided glide bomb in 1:48 scale. It serves as a store under models of combat aircraft; it is not a kit.

Scale1:48
Manufacturer Eduard
Product EAN8591111000000

Responsibility details are not available.

7.80 € 5.84 €
4.83 € without VAT
−25 % You save 1.96 €
4 pcs in stock
Free shipping on orders over 1,000 czk in czech republic Personal pickup in Prostějov 14-day returns

About product

AGM-62 Walleye I Mk.I guided bomb in 1:48 scale

A resin casting of the AGM-62 Walleye guided bomb intended as underwing armament for models of American combat aircraft in 1:48 scale. Casting in a silicone mold allows a clean surface with no mold seam and sharp fin edges, which with injection-molded plastic would call for laborious cleanup. Eduard is a Czech maker from Obrnice near Most. Neither a model of the aircraft nor the pylon from a kit is part of the package.

The real subject

The AGM-62 Walleye is an American guided glide bomb with no propulsion of its own, guided by a television camera in the front of the body. After release it glides to the target on aerodynamic surfaces, so it draws the energy for the flight from the altitude and speed of the carrier. The Walleye I standard is the basic, shorter and lighter variant of the family; later standards were larger and supplemented with a data link. A characteristic feature is the rounded guidance window at the front and the cruciform surfaces at the rear.

Usage and painting tips

With stores, symmetry is what decides. Before you start gluing, check that the bombs hang at the same height and at the same angle under both wings; the surest way is to glue both pylons, let them cure and only then hang the load. Printing or drawing a simple template helps. Watch the weight as well: resin is heavier than plastic, and several stores can shift the center of gravity on a model with a nose wheel. Try standing the model dry and add ballast in the nose if needed. The surface of the bomb is smooth, so technical lettering and bands are applied over a gloss base so that the decals do not go matte and silver. Finally, even the whole store out with a matte or satin clear coat. Before painting, do not forget to wash the casting in warm water with dish soap to remove the mold release agent.

Who the set is for

  • builders of models of American combat aircraft in 1:48 scale
  • modelers who want a faithful store instead of a simplified plastic part
  • anyone interested in Cold War air-launched guided weapons
  • those who build a model in a configuration with a combat load

This is an add-on set, not a kit. The model, glue and paints are not included in the package. Before buying, check that the set matches your own kit.

Reviews

No reviews yet Have you built this one? Tell other modellers how it went and help them choose.

Forum

Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.

Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.

There are no questions here yet. Be the first to ask!

FAQ

It is not. This is a separate resin store; you provide the model and the pylons from a kit.

Check the number of pieces on the box, especially if you plan a symmetrical load under both wings.

First glue the pylons and let them cure, and only then hang the load. Check the symmetry by eye from ahead and from behind.

They can. Resin is heavier than plastic, so on a model with a nose wheel try standing the assembly dry and add ballast in the nose if needed.

Last seen

1:48 AGM-62 Walleye I Mk.I-25 %Stock ClearanceFavorite
EduardED6486141:48

1:48 AGM-62 Walleye I Mk.I

Eduard 1:48 AGM-62 Walleye I Mk.I is a resin accessory representing the American guided glide bomb in 1:48 scale. It serves as a store under models of combat aircraft; it is not a kit.
4 left
7.80 €5.84 € You save 1.96 €
HGWHGW2480831:48

1:48 Spitfire Mk.IX - Markingy + Popisky

A set of wet transfers with national insignia and stencil markings for a model of the Spitfire Mk.IX aircraft in 1:48 scale.
In stock
47.80 €
ACEACE725601:72

1:72 Soviet 152mm gun m. 1935 Br-2

1:72 Soviet 152mm gun m. 1935 Br-2 is a plastic kit of the Soviet heavy Br-2 gun model 1935 in 1:72 scale from the manufacturer ACE.
In stock
36.36 €
Aires/QuickboostQB484871:48

1:48 MiG-23M Flogger B air scoops

Quickboost 1:48 MiG-23M Flogger B — Air Scoops is a resin detail part replacing the cooling air intakes on the fuselage. Not an airplane model; the kit is not included in the package.
In stock
4.76 €
1:48 A-4F airbrakes-25 %Stock ClearanceFavorite
EduardED489551:48

1:48 A-4F airbrakes

Eduard 1:48 A-4F airbrakes is a photo-etched set of airbrakes for refining a model of the American carrier-based Douglas A-4F Skyhawk. It is not a kit but an accessory.
Last one!
14 €10.52 € You save 3.48 €
ArmoryARAW720431:72

1:72 Tupolev Tu-22 Blinder wheels

In stock
13.56 €
Freedom Model KitsFMK162037

U.S. Navy MH-60R Sea Hawks

Freedom Model Kits U.S. Navy MH-60R Sea Hawks is a caricature plastic kit of the carrier helicopter of the US Navy in the egg models style, that is, with no scale.
In stock
19.96 €
Aires/QuickboostQB481591:48

1:48 F-4 Phantom II air intakes

Quickboost 1:48 F-4 Phantom II Air Intakes is a resin set of faithfully cast air intakes for a model of the American McDonnell Douglas F-4 Phantom II fighter.
In stock
4.76 €
Loading, please wait...

Setting consent to personalization

With your consent, we may use the information below for the following purposes or share it with selected partners. You can adjust your settings for individual purposes (types of processing) and confirm your choice with the "Save settings" button:

Always active

Necessary cookies

These are technical files that are necessary for the correct behavior of our website and all its functions. They are used, among other things, to store products in the shopping cart, display products on request, control filters, personal settings and also set consent to the use of cookies. Your consent is not required for these cookies and it is not possible to remove it.

Analytical cookies

They count website traffic and, by collecting anonymous statistics, enable the operator to better understand their visitors and thus constantly improve the site.

Marketing cookies

They collect information to better tailor advertising to your interests, both on and off this website.

Setting consent to personalization

To make it easier for you to browse the site, to offer you customized content or advertising, and to analyze traffic anonymously, we use cookies that we share with our partners for social media, advertising, and analytics. You can adjust their settings with the "Edit settings" link and you can change it at any time in the footer of the website. You can find more detailed information in our Policy on the protection of personal data and the use of cookies.