20% OFF SELECTED BRANDS! EDUARD, KINETIC, SPECIAL HOBBY, CMK & more

1:48 EMB-312 Tucano

1:48 EMB-312 Tucano is a masking set for building this turboprop trainer in 1:48 scale. An accessory for a kit that handles the extensive glazing of the tandem cockpit.

Scale1:48
Manufacturer SX-Art
Product EAN8591111000000

Responsibility details are not available.

4.76 €
3.93 € without VAT
In stock
Free shipping on orders over 1,000 czk in czech republic Personal pickup in Prostějov 14-day returns

About product

1:48 masking set EMB-312 Tucano

Cut masks for building the EMB-312 Tucano trainer in 1:48 scale. It is not an airplane model but an accessory for a plastic kit. The masks are stuck onto the areas that are meant to come out of spraying clean and are taken off once the paint has dried. The shapes are cut in advance to the parts of the model, so the most laborious part of the preparation falls away, namely piecing a mask together from strips of tape and trimming it with a scalpel on the canopy itself.

The real subject

The EMB-312 Tucano is a single-engine turboprop trainer with a two-seat tandem cockpit and retractable landing gear. For a modeler it is that glazing which is the defining feature: the canopy is long, tall and divided into several sections so that both crew members have a good view. The glazed areas therefore take up a disproportionately large part of the upper side of the fuselage and have far more frames than on an ordinary single-seat fighter.

Masking and a clean edge

The Tucano is a textbook example of when a cut mask pays off most. Masking that many small frames by hand takes hours, and one line run inaccurately is enough to make the framing look irregular. Lay the individual pieces down one after another, not all at once: settle each one dry, line it up with the engraved frame, press it with a blunt stick all the way round, and only then move on to the next. Before the target shade comes, seal the edge with a thin coat of base or clear paint. Lay the paint on with an airbrush in thin coats. Trainers tend to wear strong contrasting schemes, so the transitions are judged close up and a heavy coat on the edge makes a visible step. Take the mask off shortly after spraying, while the paint is dry only to the touch.

Who the set is for

  • Modelers building the EMB-312 Tucano in 1:48 scale
  • Anyone who does not want to mask dozens of small frames by hand
  • Builders of the strong contrasting schemes of trainers
  • Anyone dealing with paint bleeding under masking tape

The set is an accessory for a plastic kit. The model, paints and glue are not included in the package, unless stated otherwise. Check the extent of the set against the manufacturer's details before you buy.

Reviews

No reviews yet Have you built this one? Tell other modellers how it went and help them choose.

Forum

Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.

Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.

There are no questions here yet. Be the first to ask!

FAQ

It is not. This is a masking set, that is, an accessory for a plastic EMB-312 Tucano kit in 1:48 scale.

The tandem cockpit has a long, divided canopy with a large number of frames. Masking an area like that by hand takes hours and the irregularities show clearly on the finished model.

Lay the pieces down one after another and work each one down with a blunt tool all the way round. Then seal the edge with a thin coat of base or clear paint and spray the shade in thin coats.

The target kit is not stated here. Cut masks are made to the shapes of the parts of a particular kit, so check the match against the manufacturer's instructions.

Last seen

SX-ArtSXA480731:48

1:48 EMB-312 Tucano

1:48 EMB-312 Tucano is a masking set for building this turboprop trainer in 1:48 scale. An accessory for a kit that handles the extensive glazing of the tandem cockpit.
In stock
4.76 €
KAGEROKGR16067

The Russian Destroyer Spravedlivyy

The Russian Destroyer Spravedlivyy is a printed publication from the Kagero brand, devoted to the destroyer Spravedlivyy. It is not a kit and not a modeling accessory.
In stock
22.76 €
1:35 Bren Carrier accessories set
-20 %
Favorite
Black Dog modelBDT352171:35

1:35 Bren Carrier accessories set

Black Dog - a resin accessory set for the British Bren Carrier light tracked carrier in 1:35 . A cargo and detail set for a finished model.
In stock
15.96 €12.77 € You save 3.19 €
1:48 Ki-45 Kai Toryu
-20 %
Favorite
EduardEX2421:48

1:48 Ki-45 Kai Toryu

Pre-cut self-adhesive painting masks Ki-45 Kai Toryu 1:48 from the Czech manufacturer Eduard. This is not a model — it is an accessory for painting the canopy glazing and the wheels cleanly.
In stock
5.20 €4.16 € You save 1.04 €
1:72 B-26 Marauder SPACE
-20 %
Favorite
EduardED3DL720331:72

1:72 B-26 Marauder SPACE

1:72 B-26 Marauder SPACE is an Eduard add-on set from the SPACE line that brings 3D printed interior detail for a model in 1:72 scale.
In stock
11.80 €9.44 € You save 2.36 €
EvergreenEVG115

Profil 0,38 x 2,5 mm

A narrow flat strip 0.38 x 2.5 mm of white polystyrene. It suits door frames, window bars, tie loop straps and fine trim, where every tenth shows.
In stock
0.32 €
E.T. ModelEA35-0971:35

1:35 WWII German Panzerjager

Photo-etched parts in 1:35 scale for a German tank destroyer of the Second World War. The manufacturer's instructions state the particular type and the kit it is intended for.
In stock
18.36 €
Green Stuff WorldGSW9430

Self-adhesive stencils - Hexagons S - 6mm

Self-adhesive stencils with a hexagonal pattern, size S, a pattern measuring 6 mm.
In stock
3.56 €
1:48 P-39N/Q Airacobra engine
-20 %
Favorite
Aires/QuickboostQB480111:48

1:48 P-39N/Q Airacobra engine

P-39N/Q Airacobra engine 1:48 is a resin detail engine from the maker Aires. It replaces the plastic powerplant with a faithful replica of the V12 engine; it is not a model.
In stock
7.96 €6.37 € You save 1.59 €
Green Stuff WorldGSW4338

Plastic Gems 12mm - Green

Plastic Gems 12mm - Green are plastic gaming gems in green, 12 mm in size, by Green Stuff World. They are used as a marker of values restored and replenished.
In stock
3.96 €
Loading, please wait...

Setting consent to personalization

With your consent, we may use the information below for the following purposes or share it with selected partners. You can adjust your settings for individual purposes (types of processing) and confirm your choice with the "Save settings" button:

Always active

Necessary cookies

These are technical files that are necessary for the correct behavior of our website and all its functions. They are used, among other things, to store products in the shopping cart, display products on request, control filters, personal settings and also set consent to the use of cookies. Your consent is not required for these cookies and it is not possible to remove it.

Analytical cookies

They count website traffic and, by collecting anonymous statistics, enable the operator to better understand their visitors and thus constantly improve the site.

Marketing cookies

They collect information to better tailor advertising to your interests, both on and off this website.

Setting consent to personalization

To make it easier for you to browse the site, to offer you customized content or advertising, and to analyze traffic anonymously, we use cookies that we share with our partners for social media, advertising, and analytics. You can adjust their settings with the "Edit settings" link and you can change it at any time in the footer of the website. You can find more detailed information in our Policy on the protection of personal data and the use of cookies.