1:48 Mask Do-217 J-1/2 MARKING (ICM 48272)

New Ware 1:48 Do 217 J-1/2 MARKING mask is a set of masking templates for spraying the markings onto a Dornier Do 217 J model in 1:48 scale. It replaces decals with sprayed markings; it is not a model nor a glazing mask. The set is intended for the ICM 48272 kit.

Scale1:48
Manufacturer New Ware
Product EAN8591111000000

Responsibility details are not available.

7.56 €
6.25 € without VAT
1 pcs in stock
Free shipping on orders over 1,000 czk in czech republic Personal pickup in Prostějov 14-day returns

About product

New Ware 1:48 Do 217 J-1/2 MARKING - templates for spraying the markings

A masking set from the Czech maker New Ware, this time in the MARKING release. The fundamental difference from ordinary glazing masks: these templates do not serve to cover the cockpit, but to spray the markings and insignia straight onto the surface of a model. You stick them on, spray over them with the relevant paint, remove them, and a sharp marking with no carrier film edge stays on the airframe. It is an accessory, not an aircraft kit. The set is intended for the ICM 48272 kit.

The real subject

The Dornier Do 217 was a German twin-engine aircraft of the Second World War, following in shape from the Do 17 and Do 215 line but substantially larger. The J-1 and J-2 versions were a night fighter modification with a solid front section instead of a glazed nose. On this type the large areas of the fuselage and wing give the markings plenty of room, so the difference between a sprayed and a decal marking shows markedly.

Building and painting tips

A sprayed marking looks more faithful than a decal, because it has no glossy film edge and follows the texture of the surface. The condition is a perfectly adhering template edge - run a toothpick along it once it is stuck down and spray several very thin layers. With multicolor markings keep to the order from the lighter color to the darker one and let the layers dry thoroughly in between. Lay the positive parts of the template, that is, the inner islands, out dry beforehand, so that you know where they belong. The base has to be smooth; on a coarsely flattened surface the paint will bleed. Once the templates are removed, the transition can be evened out with a thin clear coat, which levels the microscopic relief of the sprayed layer.

Who the set is for

  • Builders of the Do 217 J model in 1:48 scale who want to spray the markings rather than stick them on
  • Modelers bothered by the glossy edge of decals
  • Those who build a model with heavy weathering and need to work the markings in under it
  • More experienced builders willing to work with multi-layer spraying

This is a masking set for spraying markings, not a kit and not decals. Paints and the aircraft model are not included in the package, unless stated otherwise.

Reviews

No reviews yet Have you built this one? Tell other modellers how it went and help them choose.

Forum

Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.

Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.

There are no questions here yet. Be the first to ask!

FAQ

An ordinary mask covers the cockpit glazing. The MARKING release serves to spray the markings and insignia onto the surface of a model, that is, as a replacement for decals.

A sprayed marking has no glossy carrier film edge, it follows the surface and it takes subsequent weathering and a flat coat better.

If you want to mask the cockpit too, yes - there is a separate item in the range for that. This set deals with the markings only.

The base has to be smooth, press the edge of the template down with a toothpick once it is stuck on and apply the paint in several very thin layers.

The target kit is the ICM 48272. The cut and the dimensions are based on it; with another mold the shapes may differ.

Last seen

New WareNWAM07681:48

1:48 Mask Do-217 J-1/2 MARKING (ICM 48272)

New Ware 1:48 Do 217 J-1/2 MARKING mask is a set of masking templates for spraying the markings onto a Dornier Do 217 J model in 1:48 scale. It replaces decals with sprayed markings; it is not a model nor a glazing mask. The set is intended for the ICM 48272 kit.
In stock
7.56 €
AK interactiveAK6536

ROD 0.50 DIAMETER X 350MM – STYRENE ROD – (10 UNITS)

AK Styrene Rod 0.50 mm x 350 mm is a package of 10 thin round styrene (plastic) rods with a diameter of 0.50 mm and a length of 350 mm from manufacturer AK Interactive, for scratchbuilding and detailing.
In stock
3.96 €
PmaskPw350061:35

1:35 Flakpanzer IV Mobelwagen Tamiya 35101

Pmask 1:35 Flakpanzer IV Möbelwagen is a set of self-adhesive templates for painting the rubber tires of the road wheels cleanly. The templates are cut for one particular kit of this vehicle.
In stock
2.76 €
1:200 Kamov KA-27 (5 IN BOX)-25 %Stock ClearanceFavorite
TrumpeterTR042021:200

1:200 Kamov KA-27 (5 IN BOX)

Kamov Ka-27 in 1:200 scale is a set of five plastic kits of the Soviet shipboard helicopter from Trumpeter. The set is intended above all to complete the decks of warship models in the same scale.
7 left
7.56 €5.68 € You save 1.88 €
RYE FIELD MODELRM50611:35

1:35 Sd.Kfz. 167 StuG IV Early Production w/full interior

Rye Field Model StuG IV Sd.Kfz.167 Early with full interior (1:35) is a detailed plastic kit of the German assault gun with complete internal equipment and workable tracks.
In stock
67.96 €
Dora WingsDOWI720381:72

1:72 Vultee Vengeance Mk.I / Mk.IA

An injection-molded plastic kit of the Vultee Vengeance Mk.I/IA in 1:72 scale from the maker Dora Wings: the American dive bomber in Allied service.
In stock
35.96 €
ItaleriIT70801:72

1:72 Sd. Kfz. 251/1 Wurfrahmen Stuka zu Fuss

Italeri 1:72 Sd.Kfz. 251/1 Wurfrahmen is a plastic kit of the German half-track carrier with frames for rockets.
In stock
14.36 €
Quinta StudioQD351581:35

1:35 UH-1B 3D-Printed & coloured Interior on decal paper (Trumpeter)

The colored interior of the UH-1B Huey as photorealistic 3D decals in 1:35 scale from Quinta Studio. An accessory for the Trumpeter kit; it is not a model of the helicopter.
In stock
29.96 €
ReskitRSU32-02481:32

1:32 F-35B Lightning II - cockpit (Basic edition, 3D decals included) (3D Printed) for Trumpeter

1:32 F-35B Lightning II - cockpit (Basic edition, 3D decals included) is a printed replacement cockpit including three-dimensional decals. It is an accessory for a kit, not an aircraft model.
In stock
61.16 €
Kopecky Scale ModelsKSM320711:32

1:32 F-4 Phantom II Hook for Tail parts 32035/32045

F-4 Phantom II arresting hook for aftermarket tail parts (1:32) is a resin detail from Kopecky Scale Models, intended for the separately sold replacement tail parts of the Phantom, not for the plastic tail from the box.
In stock
11.96 €
Loading, please wait...

Setting consent to personalization

With your consent, we may use the information below for the following purposes or share it with selected partners. You can adjust your settings for individual purposes (types of processing) and confirm your choice with the "Save settings" button:

Always active

Necessary cookies

These are technical files that are necessary for the correct behavior of our website and all its functions. They are used, among other things, to store products in the shopping cart, display products on request, control filters, personal settings and also set consent to the use of cookies. Your consent is not required for these cookies and it is not possible to remove it.

Analytical cookies

They count website traffic and, by collecting anonymous statistics, enable the operator to better understand their visitors and thus constantly improve the site.

Marketing cookies

They collect information to better tailor advertising to your interests, both on and off this website.

Setting consent to personalization

To make it easier for you to browse the site, to offer you customized content or advertising, and to analyze traffic anonymously, we use cookies that we share with our partners for social media, advertising, and analytics. You can adjust their settings with the "Edit settings" link and you can change it at any time in the footer of the website. You can find more detailed information in our Policy on the protection of personal data and the use of cookies.