1:48 Panavia Tornado ASSTA 3.1 exterior

The 1:48 Panavia Tornado ASSTA 3.1 exterior photo-etched set from the Czech manufacturer Eduard sharpens up the outer surfaces of a model of this combat aircraft.

Scale1:48
Manufacturer Eduard
Product EAN8591111000000

Responsibility details are not available.

17.60 €
14.55 € without VAT
3 pcs in stock
Free shipping on orders over 1,000 czk in czech republic Personal pickup in Prostějov 14-day returns

About product

Photo-etched set 1:48 Panavia Tornado ASSTA 3.1 - exterior (Eduard)

A set of photo-etched metal parts aimed at the exterior of the Tornado model to the ASSTA 3.1 standard, in 1:48. It is made by the Czech company Eduard. Exterior sets concentrate on the elements that are made of thin sheet metal on the real aircraft: covers, grilles, protrusions and loops. In plastic they inevitably come out thicker, because a mold cannot hold a finer thickness.

The real subject

The Panavia Tornado is a twin-engine combat aircraft with a variable-geometry wing, developed by the international Panavia consortium with German, British and Italian participation. Its hallmarks are the high-set wing, which sweeps in flight according to the regime, and a crew of two in tandem. The ASSTA 3.1 designation refers to an upgrade standard of the avionics and systems that some of the IDS aircraft went through. The external differences between standards tend to lie in the details of antennas and covers, which is exactly what photo-etched sets concentrate on.

Usage tips - working on the outer surface

Exterior etched parts are glued onto an already finished and sanded surface, so think the order of the steps through in advance. First finish filling and sanding the seams, and only then position the etched parts, otherwise you will tear them off while sanding. Roughen and degrease the spot, and apply the glue in a microscopic amount on the tip of a wire. Excess cyanoacrylate glue turns white once it has dried and on a smooth surface it shows immediately. If an etched part replaces a plastic protrusion, cut the plastic off first and level the area flat. Painting then follows after the part is glued on, so that the transition between metal and plastic disappears under a common coat of primer.

Who the set is for

  • Builders of the Tornado model in 1:48
  • Modelers who want to sharpen up the outer surfaces of the aircraft
  • Anyone interested in modern European military aviation
  • More experienced builders used to working with photo-etched parts

This is an add-on set, not a model in its own right. The base kit, glue and paints are not included in the package, unless stated otherwise.

Reviews

No reviews yet Have you built this one? Tell other modellers how it went and help them choose.

Forum

Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.

Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.

There are no questions here yet. Be the first to ask!

FAQ

No. It is a set of photo-etched metal parts that supplement the 1:48 Tornado kit.

After the seams have been filled and sanded, but still before priming and painting. Otherwise they would be torn off during sanding.

The exterior set deals with the outer surfaces of the aircraft, the interior one concentrates on the cockpit. Both can be used at the same time.

The specific contents are not stated here. The parts list is stated by the manufacturer on the packaging of the set.

Last seen

EduardED4810401:48

1:48 Panavia Tornado ASSTA 3.1 exterior

The 1:48 Panavia Tornado ASSTA 3.1 exterior photo-etched set from the Czech manufacturer Eduard sharpens up the outer surfaces of a model of this combat aircraft.
In stock
17.60 €
WHITEBOXWB107151:43

1:43 Maserati Coupe' Cambiocorsa 2002

Maserati Coupe Cambiocorsa 2002 is a finished metal collector model of an Italian sports car in 1:43 scale from WHITEBOX.
In stock
8.76 €
Mark IMKM1440501:144

1:144 Bristol Beaufighter Mk.IF/VIF

A plastic model of the Bristol Beaufighter Mk.IF/VIF in 1:144 scale from Mark I — the British heavy and night fighter with radar.
In stock
15.56 €
HGWHGW1326791:32

1:32 Fokker D.VII - Super Detail Set

The premium detail set HGW Super Detail Set Fokker D.VII (1:32) : fabric seat belts, photo-etched parts and masks for improving a kit of the biplane. It is not an airplane model but an add-on set.
In stock
42.24 €
Red Fox StudioRFSQS-321361:32

1:32 Mitsubishi A6M5 Zero Type 52 (for Hasegawa)

The Mitsubishi A6M5 Zero Type 52 in 1:32 is a 3D printed color instrument panel from Red Fox Studio on a self-adhesive backing — a realistic accessory for detailing the cockpit, not a kit.
In stock
16.76 €
Loading, please wait...

Setting consent to personalization

With your consent, we may use the information below for the following purposes or share it with selected partners. You can adjust your settings for individual purposes (types of processing) and confirm your choice with the "Save settings" button:

Always active

Necessary cookies

These are technical files that are necessary for the correct behavior of our website and all its functions. They are used, among other things, to store products in the shopping cart, display products on request, control filters, personal settings and also set consent to the use of cookies. Your consent is not required for these cookies and it is not possible to remove it.

Analytical cookies

They count website traffic and, by collecting anonymous statistics, enable the operator to better understand their visitors and thus constantly improve the site.

Marketing cookies

They collect information to better tailor advertising to your interests, both on and off this website.

Setting consent to personalization

To make it easier for you to browse the site, to offer you customized content or advertising, and to analyze traffic anonymously, we use cookies that we share with our partners for social media, advertising, and analytics. You can adjust their settings with the "Edit settings" link and you can change it at any time in the footer of the website. You can find more detailed information in our Policy on the protection of personal data and the use of cookies.