A resin wheel set for the Spitfire in 1:72 scale from SBS Model. A detail accessory with three-spoke rims and a radial tread pattern on the tires.
Responsibility details are not available.
A resin wheel set in 1:72 scale from SBS Model, intended to improve the landing gear of a model of the Spitfire fighter. It is not an aircraft model but a detail accessory (an upgrade set) that replaces the wheels from the original kit with more faithful castings. The set holds wheels with three-spoke rims and a radial (lengthwise) tread pattern on the tires. It is supplied unpainted.
On aircraft models the wheels are among the most conspicuous details, because they are seen close up and carry the weight of the whole build. Resin castings offer a sharper rendering of the rim and of the tread pattern than the stock plastic parts, and many sets have a flattened contact patch that suggests a loaded tire. The three-spoke rim and the radial tread match the typical treatment of Spitfire wheels.
First wash the parts in lukewarm soapy water so that the residual mold release layer is removed. Carefully cut off the casting blocks and clean them up with respiratory protection. Bond with super glue (cyanoacrylate). Apply a primer before painting, bring the rims out according to the scheme you have chosen and the tires in dark gray with a fine dusting; at the end pick out the tread with a dry brush.
The accessory is supplied unpainted, as a resin set. Paints, glue and the base model are not included in the package, unless stated otherwise.
Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.
Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.
There are no questions here yet. Be the first to ask!