20% OFF SELECTED BRANDS! EDUARD, KINETIC, SPECIAL HOBBY, CMK & more
1:48 de Havilland Chipmunk T.10 3D Full colour Cockpit Set including Seat Belts & Cushions

1:48 de Havilland Chipmunk T.10 3D Full colour Cockpit Set including Seat Belts & Cushions

13.56 €
Add to Cart

1:48 de Havilland Chipmunk T.10 3D Full colour Cockpit Set including Seat Belts & Cushions

Kits-World 1:48 de Havilland Chipmunk T.10 3D color cockpit set including seat belts and cushions brings decals of the instrument panels together with the seat belts in one box.

Scale1:48
Manufacturer Kits-World
Product EAN9591111000054

Responsibility details are not available.

13.56 €
11.21 € without VAT
In stock
Free shipping on orders over 1,000 czk in czech republic Personal pickup in Prostějov 14-day returns

About product

Kits-World 1:48 de Havilland Chipmunk T.10 Color Cockpit Set with Belts and Cushions

Compared with the separate panels, this is a wider set: according to the name it covers cockpit elements including the seat belts and the padding, all of it as full-color decals with a raised relief. The Chipmunk is a trainer with tandem seating, so there are two stations to work on and a matching number of belts. It is neither a kit nor a resin cockpit tub but an accessory to the parts from the box in 1:48 scale.

A small cockpit with wide visibility

On a trainer the canopy tends to be glazed along its whole length and the inside is visible from both sides at once. At the same time it is a small aircraft, so the interior makes up a fairly large part of the finished model. A set that handles the panels and the belts together makes sense here above all because the whole cockpit comes out uniform in color: the printing comes from one sheet, so the shades match each other, which rarely works out when the parts are put together from different places.

Recommended order of work

Deal with the instrument panels first and only then the belts: a panel is harder to move around and it is good to have free access while you settle it. Sand all the surfaces smooth, spray them with a dark base and overcoat with gloss varnish. Settle the decals with plenty of water, align them and blot the water away. Apply the softener drop by drop and without running a brush over it, leaving the decal undisturbed for at least 45 minutes; with belts that have to pass over the edge of the cushion, repeat the dose once it has dried rather than forcing it. Matte varnish goes onto the whole interior at the end; only the instrument glazing is left out.

Who the set is for

  • Builders of the Chipmunk in 1:48
  • Modelers who want the panels and the belts from one source
  • Builds with a canopy glazed along its whole length
  • Those who do not want to combine photo-etch with decals

The box holds decals only. It does not include the kit, paints, varnish or decal softener.

Reviews

No reviews yet Have you built this one? Tell other modellers how it went and help them choose.

Forum

Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.

Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.

There are no questions here yet. Be the first to ask!

FAQ

According to the name it is a cockpit set including the seat belts and the padding. The exact list of parts in the box is not stated here.

The instrument panels first, then the belts. The panel needs free access while it is being settled.

Put on a drop of softener, let it dry and repeat the dose. Pressing it down with a brush will damage the relief print.

It does not. It adds color and relief to the parts from the kit; the shapes stay as they were.

Last seen

Kits-WorldKW3D14810201:48

1:48 de Havilland Chipmunk T.10 3D Full colour Cockpit Set including Seat Belts & Cushions

Kits-World 1:48 de Havilland Chipmunk T.10 3D color cockpit set including seat belts and cushions brings decals of the instrument panels together with the seat belts in one box.
In stock
13.56 €
BST-B004

In stock
9.96 €
T-Rex StudioTR35003-41:35

1:35 M1 ABRAMS DRIVE SPROCKET SET A (ACTIVE VERSION) FOR TAMIYA

M1 Abrams, a set of type A drive sprockets in the Active version , in 1:35 scale by T-Rex Studio. Replacement drive sprockets cut for the Tamiya kit.
In stock
30.76 €
Hobby BossHB858191:48

1:48 Boeing F/A-18 F Super Hornet (VFC-12)

A complete plastic kit of the two-seat F/A-18F Super Hornet carrier-borne fighter bomber in 1:48 scale. Unlike the rest of the range of accessories, this is the very basis of a build.
In stock
45.16 €
LACILAC7300011:72

1:72 72 MIGNET FLYING FLEA

A kit of the small amateur-built Flying Flea aircraft by the French designer Henri Mignet, in 1:72 scale.
In stock
19.96 €
Zero PaintsZP-5117

30ml Basecoat Thinners

Zero Paints Basecoat Thinners 30ml is a thinner intended for the basecoat range of the Zero Paints system. It thins as a lacquer, on a solvent base, with a volume of 30 ml.
In stock
7.96 €
FujimiFU451751:700

1:700 Ijn Heavy Cruiser Chokai - Full Hull

An injection-molded plastic kit of the Japanese heavy cruiser IJN Chokai in 1:700 scale from the maker Fujimi, in the full-hull version and with photo-etch.
In stock
43.16 €
ETA dioramaETA2331:35

1:35 New York - Store Signs

ETA diorama 1:35 New York - Store Signs is a set of printed store signs and shop windows in the American big-city style for dioramas in 1:35 scale.
In stock
3.96 €
MineshimaMNS-TM10

Edge Nipper TM10

TM10 nippers with an angled tip are Japanese nippers 120 mm long with a flush cut that reach a gate at an angle from the side.
In stock
39.96 €
FujimiFU451931:700

1:700 Ijn Battleship Musashi (1944 / Sho Ichigo Operation) - Full Hull Model

A model of the battleship Musashi in her 1944 form in 1:700 scale . The version with the whole hull from the Japanese brand Fujimi.
In stock
43.16 €
Loading, please wait...

Setting consent to personalization

With your consent, we may use the information below for the following purposes or share it with selected partners. You can adjust your settings for individual purposes (types of processing) and confirm your choice with the "Save settings" button:

Always active

Necessary cookies

These are technical files that are necessary for the correct behavior of our website and all its functions. They are used, among other things, to store products in the shopping cart, display products on request, control filters, personal settings and also set consent to the use of cookies. Your consent is not required for these cookies and it is not possible to remove it.

Analytical cookies

They count website traffic and, by collecting anonymous statistics, enable the operator to better understand their visitors and thus constantly improve the site.

Marketing cookies

They collect information to better tailor advertising to your interests, both on and off this website.

Setting consent to personalization

To make it easier for you to browse the site, to offer you customized content or advertising, and to analyze traffic anonymously, we use cookies that we share with our partners for social media, advertising, and analytics. You can adjust their settings with the "Edit settings" link and you can change it at any time in the footer of the website. You can find more detailed information in our Policy on the protection of personal data and the use of cookies.