A plastic kit of a dragster with a wedge body in 1:25 scale, associated with the name of the American racer Tom McEwen, nicknamed Mongoose. It is supplied unassembled and unpainted.
Responsibility details are not available.
A dragster is a single-purpose car for acceleration races on a straight track. You will recognize it by its long narrow frame, small front wheels and wide driven wheels at the rear. This car belongs to the versions with a wedge body, that is, with a shell that widens smoothly from the tip toward the rear. The name in the designation refers to the American racer Tom McEwen, who was nicknamed Mongoose.
The plastic parts of the model in 1:25 scale and the documentation for finishing it. The assembly consists of the frame, the powerplant, the wheels and the split body shell; the range of parts, the markings and the recommended shades are given in the instructions enclosed with the package. The car is built as a whole, so it also serves as a basis for your own reworking of the color scheme.
Assemble the frame first and check that it stands without a twist; on a long frame a deviation shows up at once. Nip the parts off a little away from the joint and sand the remainder. Prepare the glossy body carefully: fill the joints, go over the surface with fine paper and apply the paint in thin coats, or the smooth finish will not come off. Fit the wheels only after painting, and if tire flattening is suggested on the parts, turn it toward the ground.
The paints, the glue and the filler are not included in the delivery, unless stated otherwise.
Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.
Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.
There are no questions here yet. Be the first to ask!