20% OFF SELECTED BRANDS! EDUARD, KINETIC, SPECIAL HOBBY, CMK & more
1:35 Pantsir-S1 (SA-22 Greyhound) 3D-Printed & coloured Interior on decal paper (Trumpeter)

1:35 Pantsir-S1 (SA-22 Greyhound) 3D-Printed & coloured Interior on decal paper (Trumpeter)

14.08 €
Add to Cart

1:35 Pantsir-S1 (SA-22 Greyhound) 3D-Printed & coloured Interior on decal paper (Trumpeter)

Quinta Studio 1:35 colored 3D decals for the interior of the Pantsir-S1 system replace the flat details of the inside of a model. The set is cut for the Trumpeter kit.

Scale1:35
Manufacturer Quinta Studio
Product EAN5591111000009

Responsibility details are not available.

18.76 € 14.08 €
11.64 € without VAT
−25 % You save 4.68 €
In stock
Free shipping on orders over 1,000 czk in czech republic Personal pickup in Prostějov 14-day returns

About product

Quinta Studio 1:35 Pantsir-S1 - 3D interior decals

These are colored 3D interior decals in 1:35 scale for a model of the Pantsir-S1 self-propelled anti-aircraft system, known in the West as the SA-22 Greyhound. It is not a kit or a resin set - the decals are applied to the plastic interior parts and replace their flat or merely suggested details with a finished colored rendering. Importantly, this set is cut for the Trumpeter kit. The kit and paints are not included in the package.

The real subject

The Pantsir-S1 is a Russian self-propelled anti-aircraft system combining radar equipment, guided missiles and rapid-fire cannons on a single carrier. The vehicle is built on a heavy wheeled chassis carrying a rotating section with the armament and the antennas. Models in 1:35 scale usually have a carefully worked cab and crew stations, but the plastic details are flat and telling them apart by color takes a lot of work with a brush - and that is exactly the situation this decal set aims at.

Application and tips

First paint the interior parts and let them dry thoroughly, then spray them with a gloss varnish - the decal has no adhesive layer of its own and holds precisely on the gloss. Soak it for about fifteen seconds in lukewarm water, wait until it releases from the backing paper, slide it into place with a soft brush and blot the excess water away with a tissue. Do not use a decal softener or a decal fixer: their chemistry attacks the printed resin and destroys the part; on intricate surfaces a drop of cyanoacrylate glue will help. At the end, even the surface out with a matte or semi-gloss varnish, so that the edges of the carrier film do not show. Finish everything before you close the cab up.

Who the set is for

  • Builders of modern wheeled vehicles in 1:35 scale
  • Modelers who want a legible interior without painting tiny instruments
  • Those who build a model with the doors open or for a scene
  • Anyone after more detail without cutting into the structure of the model

This is an add-on decal set, not a model. The base kit, paints and varnishes are not included in the package, unless stated otherwise.

Reviews

No reviews yet Have you built this one? Tell other modellers how it went and help them choose.

Forum

Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.

Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.

There are no questions here yet. Be the first to ask!

FAQ

For the Trumpeter kit in 1:35 scale, as the name of the set states. Check the designation on the box before buying.

On a matte surface air stays trapped under the film and the decal silvers. A gloss base prevents that and the joint will be invisible.

Not physically. It is applied to them and replaces their flat details with a colored rendering.

Check the number of decals and the size of the sheet on the box. The contents of the package from the manufacturer decide.

Last seen

1:35 Pantsir-S1 (SA-22 Greyhound) 3D-Printed & coloured Interior on decal paper (Trumpeter)-25 %Stock ClearanceFavorite
Quinta StudioQD350631:35

1:35 Pantsir-S1 (SA-22 Greyhound) 3D-Printed & coloured Interior on decal paper (Trumpeter)

Quinta Studio 1:35 colored 3D decals for the interior of the Pantsir-S1 system replace the flat details of the inside of a model. The set is cut for the Trumpeter kit.
2 leftof 6
18.76 €14.08 € You save 4.68 €
Offset Scale ModelsOFFS144031:144

1:144 A/S32-31A USN Tow Tractor

A model of the A/S32-31A deck tractor for handling aircraft with the US Navy in 1:144 scale. An accessory to small airfield scenes.
In stock
22.36 €
16.02VK350041:35

1:35 German Bergehetzer with 3cmFlak 38

A plastic kit of the German Bergehetzer recovery vehicle completed with a 3 cm Flak 38 antiaircraft gun, 1:35 scale.
In stock
47.96 €
Napínáky s ukotvením - typ B
-20 %
Favorite
Firma4949L012/70

Napínáky s ukotvením - typ B

Turnbuckles with anchors, the type B form. Small parts with which the bracing cables on an aircraft model are finished off.
In stock
5.56 €4.45 € You save 1.11 €
New WareNWAM12541:72

1:72 Westland Sea King HC.4, HC.3/Mk.43 ADVANCED kabuki masks

Kabuki masks for the glazing of models of the Westland Sea King helicopter in the HC.4, HC.3 and Mk.43 versions in 1:72 scale, in the ADVANCED rendition.
In stock
7.16 €
1:72 Bushmaster Protected Mobility Vehicle-25 %Stock ClearanceFavorite
DragonDR630301:72

1:72 Bushmaster Protected Mobility Vehicle

The Bushmaster Protected Mobility Vehicle 1:72 is a finished, assembled and painted collector's model from the maker Dragon. It is not a kit, and the model is ready for a display case straight away.
Last one!
39.96 €29.96 € You save 10 €
New WareNWAM10201:48

1:48 Mi-35M BASIC kabuki masks

A masking set of kabuki paper in 1:48 scale for a model of the Mi-35M attack helicopter, in the basic BASIC extent.
In stock
9.56 €
Green Stuff WorldGSW4710

Opaque Colors - Donkey Grey

Opaque Colors - Donkey Grey from Green Stuff World is a muted gray shade. It suits animal fur, stone, concrete and gray items of equipment.
In stock
2.76 €
Loading, please wait...

Setting consent to personalization

With your consent, we may use the information below for the following purposes or share it with selected partners. You can adjust your settings for individual purposes (types of processing) and confirm your choice with the "Save settings" button:

Always active

Necessary cookies

These are technical files that are necessary for the correct behavior of our website and all its functions. They are used, among other things, to store products in the shopping cart, display products on request, control filters, personal settings and also set consent to the use of cookies. Your consent is not required for these cookies and it is not possible to remove it.

Analytical cookies

They count website traffic and, by collecting anonymous statistics, enable the operator to better understand their visitors and thus constantly improve the site.

Marketing cookies

They collect information to better tailor advertising to your interests, both on and off this website.

Setting consent to personalization

To make it easier for you to browse the site, to offer you customized content or advertising, and to analyze traffic anonymously, we use cookies that we share with our partners for social media, advertising, and analytics. You can adjust their settings with the "Edit settings" link and you can change it at any time in the footer of the website. You can find more detailed information in our Policy on the protection of personal data and the use of cookies.