Armory 1:144 - wheels for the AH-64 Apache with weighted tires is a resin set of replacement landing gear wheels for an attack helicopter, not a kit.
Responsibility details are not available.
This is not a helicopter model but a detail set. The resin wheels replace the landing gear wheels from the plastic AH-64 kit in 1:144 scale. The tires are cast with a sagged contact surface, so the machine does not stand on perfectly round cylinders on its base but really bears down.
The AH-64 Apache is a twin-engine attack helicopter of American design with a crew of two seated in tandem. It has fixed landing gear, that is, main wheels at the sides of the fuselage and a tail wheel at the back. Precisely because the gear does not retract, it stays visible on a finished model and its treatment has a marked effect on the overall impression.
Weighted tires only make sense when the contact patch points perpendicular to the base. Before the glue cures, therefore, stand the model on a flat board and turn all the wheels so that they sit on their whole flat; on a helicopter with fixed gear a tilted wheel can be seen at a glance. Wash the castings beforehand in lukewarm water with dish soap so that the mold release agent disappears from them. Cut the casting block off with a saw where it meets the contact surface and level the rest wet. They are attached with cyanoacrylate glue, which should be applied drop by drop with the tip of a wire. Do not spray the tires pure black; dark gray with a slight hint of brown looks considerably more convincing in a small scale, especially when you dust it with pigment at the end.
This is an accessory for a model, not a kit. The model itself, paints and glue are not included in the package.
Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.
Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.
There are no questions here yet. Be the first to ask!