1:144 F16 Recce pod DB-MS110 (Deployed)

A reconnaissance pod for the F-16 aircraft under the designation DB-MS110, in 1:144 scale. An accessory for modelers who want more than just a fuel tank under the fuselage.

Scale1:144
Manufacturer Rise144models
Product EAN8591111783599

Responsibility details are not available.

5.56 €
4.60 € without VAT
In stock
Free shipping on orders over 1,000 czk in czech republic Personal pickup in Prostějov 14-day returns

About product

The real subject

Reconnaissance pods made it possible for fighters to do work for which special versions used to be built. A pod is hung on a pylon, carries imaging equipment inside and is taken off again after landing, so an ordinary machine becomes a reconnaissance aircraft for one flight. The F-16 is among the types on which this way of working spread, and a reconnaissance pod hung under the aircraft is a common sight on it.

What the set contains

The box brings an accessory for a model of the F-16 aircraft in 1:144 scale, that is a pod in the rendition distinguished in the designation by the addition Deployed. In this scale it is a small part a few millimeters long, but all the better suited to a model where there are otherwise not many chances to add something.

Building and painting tips

  • The part is not polystyrene and an ordinary modeling cement will not join it; reach for super glue or epoxy.
  • Cut the excess material away with a sharp blade a little clear of the part and sand the rest level with the mating surface.
  • Wash the part in lukewarm soapy water before painting and let it dry.
  • Check the fitting on the right pylon and any work on the mating surface against the manufacturer's instructions and against your own kit.

Who it is for

The accessory will be appreciated by builders of the small scales who build the F-16 in a particular form and do not want to stop at the armament from the box. It also serves well to set one machine apart in a larger collection.

Terms of supply

The pod itself is supplied as described. The kit of the aircraft, an additional pylon, paints and glue are not included in the package, unless stated otherwise.

Reviews

No reviews yet Have you built this one? Tell other modellers how it went and help them choose.

Forum

Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.

Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.

There are no questions here yet. Be the first to ask!

FAQ

It carries imaging equipment for reconnaissance. It is hung on a pylon, so an ordinary fighter becomes a reconnaissance aircraft for one flight.

The designation does not give a particular kit. It is an accessory for the F-16 in 1:144 scale; check the seating against the manufacturer's instructions and against your own model.

It is not polystyrene, so an ordinary modeling cement has no effect. Use super glue or epoxy on a degreased surface.

Contents beyond the pod are not stated here; check the rest on the packaging.

Last seen

Rise144models144RM0931:144

1:144 F16 Recce pod DB-MS110 (Deployed)

A reconnaissance pod for the F-16 aircraft under the designation DB-MS110, in 1:144 scale. An accessory for modelers who want more than just a fuel tank under the fuselage.
In stock
5.56 €
Easy ModelEA362281:72

1:72 Elefant Italy 1944

Easy Model 1:72 Elefant Italy 1944 is a finished model of the German heavy tank destroyer. It is supplied assembled and painted, ready for display.
In stock
15.56 €
EduardED6530011:350

1:350 USN searchlights 36 inch PRINT

USN searchlights 36 inch PRINT 1:350 is a 3D-printed resin set of searchlights by Eduard for models of US Navy warships.
In stock
6 €
EduardED6485331:48

1:48 Lockheed P-38F/G Lightning nose gun bay

1:48 Lockheed P-38F/G Lightning nose gun bay is a resin add-on set from Eduard for detailing the gun bay in the nose. It is an accessory, not an aircraft model.
In stock
27 €
HGWHGW2320381:32

1:32 Daimler Benz 601 Engine Stencils

Daimler-Benz 601 Engine Stencils are wet transfers with the technical stencils and markings of the Daimler-Benz 601 engine in 1:32 scale from the maker HGW.
In stock
2.80 €
Loading, please wait...

Setting consent to personalization

With your consent, we may use the information below for the following purposes or share it with selected partners. You can adjust your settings for individual purposes (types of processing) and confirm your choice with the "Save settings" button:

Always active

Necessary cookies

These are technical files that are necessary for the correct behavior of our website and all its functions. They are used, among other things, to store products in the shopping cart, display products on request, control filters, personal settings and also set consent to the use of cookies. Your consent is not required for these cookies and it is not possible to remove it.

Analytical cookies

They count website traffic and, by collecting anonymous statistics, enable the operator to better understand their visitors and thus constantly improve the site.

Marketing cookies

They collect information to better tailor advertising to your interests, both on and off this website.

Setting consent to personalization

To make it easier for you to browse the site, to offer you customized content or advertising, and to analyze traffic anonymously, we use cookies that we share with our partners for social media, advertising, and analytics. You can adjust their settings with the "Edit settings" link and you can change it at any time in the footer of the website. You can find more detailed information in our Policy on the protection of personal data and the use of cookies.