1:144 German pilot of the Second World War, two pieces is a set of two small figures in 1:144 scale. It is not a kit: it is an accessory that brings an aircraft model already built, or an airfield scene, to life.
Responsibility details are not available.
A pair of pilot figures scaled to 1:144 from the Czech accessory maker Brengun. The figures complete a model you already have and are not a model in themselves. In 1:144 scale a figure measures approximately twelve millimeters, about the size of a little fingernail, and the tools and the painting procedure have to be chosen accordingly.
A figure beside an aircraft tells you the size of the machine at once. On single-seat fighters in 1:144 scale it is often the only way to give a model a sense of scale, because there is no other point of comparison. In a display case it works more reliably than the finest weathering.
Remove the casting remnant from the figure with a sharp scalpel, run a sanding sponge over the fine seam and degrease the part. It pays to paint the figure before you glue it down, mounted on a toothpick or a wooden stick attached with a drop of glue at the feet. Spray the base coat and paint the rest with a size zero brush or smaller. Thin the paint more than usual on an area this small and apply it in two thin coats: thick paint floods the engraved folds. Finish with a matte varnish so that the figure does not shine in backlight.
The figures are supplied unpainted and without a model. Paints and glue are not included in the package, unless stated otherwise.
Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.
Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.
There are no questions here yet. Be the first to ask!
