20% OFF SELECTED BRANDS! EDUARD, KINETIC, SPECIAL HOBBY, CMK & more

1:16 Sd.Kfz 251

Sd.Kfz. 251 Ausf. D in 1:16 scale from Trumpeter — a large plastic kit of the German half-track armored personnel carrier with a well worked interior, photo-etched parts and individual track links. The finished model measures almost 40 cm in length.

Scale1:16
Manufacturer Trumpeter
Product EAN8591111900041

Responsibility details are not available.

91.96 €
71.96 €
59.47 € without VAT
−22 % You save 20 €
In stock
Free shipping on orders over 1,000 czk in czech republic Personal pickup in Prostějov 14-day returns

About product

Sd.Kfz. 251 Ausf. D 1:16 — a plastic kit, Trumpeter

An injection-molded plastic kit of the German half-track armored personnel carrier Sd.Kfz. 251 in the Ausf. D version. The 1:16 scale is exceptionally large for military equipment — according to the maker's figures the finished model has a length of roughly 397 mm and a width of approximately 139 mm. Count on the display case and the workbench having to have enough room. The set is mostly of gray plastic, and some of the frames are molded in a rust-colored shade; photo-etched parts, rubber tires for the front wheels, individual track links, a well worked interior with the driver's position and machine guns on swing arms at the front and the rear are included. The decals offer six marking variants complemented by color drawings.

The real subject

The Sd.Kfz. 251, known in modeling and military slang as the Hanomag, was a half-track armored personnel carrier: wheels at the front, a tracked running gear at the rear. Its task was not to fight like a tank but to bring Panzergrenadiers right up behind the attacking tanks and to keep pace with them off the roads as well. The hull is open at the top, which gave the crew a view out and a quick exit, but no protection against shrapnel from above. The Ausf. D is the later, production-simplified version with smooth sloped sides at the rear. The vehicle is one of the most typical images of the German armored formations of the war.

Building and painting tips

The open hull is the greatest opportunity and the greatest commitment here: once it is built the interior is visible in its entirety, so it pays to paint and weather the inside before you close the hull up. In the same way, finish the running gear and the tracks before fitting the fenders — a brush will not reach them afterwards. Glue with a liquid cement for plastic, spray a primer and apply the paint with an airbrush. For the patina use washes in the recesses and pigments for mud and dust effects on the tracks and the fenders. In this scale every detail is visible — but so is every gap that has not been dealt with.

Who the model is for

  • Modelers who want one large, striking piece instead of a row of small ones
  • Lovers of interiors — the open hull invites further work
  • Builders of dioramas where the vehicle is to dominate the scene
  • More experienced builders; with individual track links and photo-etched parts this is not one evening's work
  • Collectors of German equipment of the Second World War

The model is supplied unassembled and unpainted. Glue, paints and accessories are not included in the package, unless stated otherwise.

Reviews

No reviews yet Have you built this one? Tell other modellers how it went and help them choose.

Forum

Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.

Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.

There are no questions here yet. Be the first to ask!

FAQ

The maker states a length of approximately 397 mm and a width of around 139 mm. It really is a sizeable model — before buying, check that you have room for it in a display case.

The tracks are made up of individual links, which are put together link by link. It gives a substantially better result than a rubber track, but it is extra work and it calls for patience.

Rather not. The large number of parts, the photo-etched parts and the assembled tracks assume that you already have a few models behind you. If you are starting out, reach for a simpler set in a smaller scale.

Yes, the hull of the carrier is open at the top, so the inside stays permanently in view. Paint and weather it, therefore, before you close the hull up.

Last seen

1:16 Sd.Kfz 251
-22 %
Favorite
TrumpeterTR009421:16

1:16 Sd.Kfz 251

Sd.Kfz. 251 Ausf. D in 1:16 scale from Trumpeter — a large plastic kit of the German half-track armored personnel carrier with a well worked interior, photo-etched parts and individual track links. The finished model measures almost 40 cm in length.
In stock
91.96 €71.96 € You save 20 €
GF ModelsGF-20-0341:20

1:20 Driver

A resin figure, GF Models 1:20 Driver — a seated racing car driver in 1:20 scale to bring Formula and sports car models to life.
In stock
19.96 €
Yahu ModelsYML72101:72

1:72 IAR-81

Colored photo-etched instrument panel IAR-81 in 1:72 scale from Yahu Models. A pre-painted and assembled cockpit accessory for the Romanian fighter.
In stock
2.76 €
1:32 A6M5c
-20 %
Favorite
EduardJX1941:32

1:32 A6M5c

A set of painting masks for the A6M5c Zero in 1:32 scale from Eduard. They serve for accurate masking of the glazing and other areas during painting; the model itself is obtained separately.
In stock
9 €7.20 € You save 1.80 €
1:72 Il-2M3
-20 %
Favorite
EduardCX3681:72

1:72 Il-2M3

Eduard Il-2M3 masking set 1:72 is a set of precisely cut self-adhesive painting masks for a plastic model of the Soviet Ilyushin Il-2M3 Shturmovik attack aircraft. It is not a model but an aid for painting the cockpit frames and the glazing.
In stock
6.80 €5.44 € You save 1.36 €
1:72 GBU-24
-20 %
Favorite
EduardED6722641:72

1:72 GBU-24

Eduard 1:72 GBU-24 is a resin weapons set of laser-guided bombs for realistically arming models of combat aircraft.
In stock
6.80 €5.44 € You save 1.36 €
Master ToolsMT08073

Basic etching parts - circle 3

Master Tools Basic etching parts - circle 3 is a photo-etched metal sheet with circular parts that serves as a universal stock of detail for building and modifying plastic models.
In stock
3.56 €
GasPatch modelsGP25-483511:48

1:48 Clerget 9B Version 2

The Clerget 9B nine-cylinder rotary of one hundred thirty horsepower in 1:48, the second form of the casting. The most widespread powerplant of Allied fighters of the second half of the First World War.
In stock
14.36 €
Loading, please wait...

Setting consent to personalization

With your consent, we may use the information below for the following purposes or share it with selected partners. You can adjust your settings for individual purposes (types of processing) and confirm your choice with the "Save settings" button:

Always active

Necessary cookies

These are technical files that are necessary for the correct behavior of our website and all its functions. They are used, among other things, to store products in the shopping cart, display products on request, control filters, personal settings and also set consent to the use of cookies. Your consent is not required for these cookies and it is not possible to remove it.

Analytical cookies

They count website traffic and, by collecting anonymous statistics, enable the operator to better understand their visitors and thus constantly improve the site.

Marketing cookies

They collect information to better tailor advertising to your interests, both on and off this website.

Setting consent to personalization

To make it easier for you to browse the site, to offer you customized content or advertising, and to analyze traffic anonymously, we use cookies that we share with our partners for social media, advertising, and analytics. You can adjust their settings with the "Edit settings" link and you can change it at any time in the footer of the website. You can find more detailed information in our Policy on the protection of personal data and the use of cookies.