An etched instrument panel for a model of the Yak-9 aircraft in 1:72 scale, intended for the kit by the brand Dakoplast.
Responsibility details are not available.
The Yak-9 was a single-seat Soviet fighter of the Second World War and the most numerous type of its family. It served from 1942 to the end of the war and, in many versions, afterwards as well. The cockpit of these machines was austere, which makes the instrument panel all the more visible on a model: it is the first thing one looks at through an open canopy.
An etched instrument panel for a model in 1:72 scale. Etched metal is a thin metal sheet with an etched relief, so the panel has a much finer rendering of the edges and openings than the part from a kit. The part is intended for the kit by the brand Dakoplast, listed under the abbreviation DKP.
Separate the part from the fret with a sharp blade on a hard surface, not with scissors; sand the remainder of the tab away carefully, so that the edge stays straight. Etched metal is greasy from manufacture, so degrease it before painting and use a primer, otherwise the coat peels. Apply the paint thinly, so that it does not flood the fine detail. Glue the panel onto the model with super glue only once the interior paintwork is finished; apply it in drops with a pin, as an excess is hard to remove.
For a modeler who is building a Yak at a small scale and wants a cockpit worth looking into. Working with etched metal calls for tweezers, a steady hand and good light, but no special experience is needed.
The kit, paints and glue are not part of the delivery, unless stated otherwise.
Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.
Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.
There are no questions here yet. Be the first to ask!