Wheels with the rim pattern BMW Styling 24 in the form for a seventeen-inch diameter, 1:24 scale. A replacement for the wheels from a kit.
Responsibility details are not available.
Wheels with the rim pattern that BMW carries under the factory designation Styling 24, in the form for a seventeen-inch diameter and in 1:24 scale. The figure in inches belongs to the subject: seventeen inches is 432 mm, which in 1:24 scale works out to a rim roughly eighteen millimeters in diameter.
The wheel is the first thing on a model car that a viewer compares with the real vehicle. A kit offers a single pattern, and as soon as you are building a particular car from a photograph, it tends to be exactly the wrong one. The factory Styling designation with its sequence number meanwhile identifies the pattern unambiguously, so you choose the wheel according to the subject and not according to the contents of a box.
Put the wheel on dry first and check whether it sits on the axle pin; widen the hole in the hub carefully with a round file as needed, not with a drill at one go. If the parts are not of polystyrene, liquid cement for plastic has no effect on them and they are joined with cyanoacrylate glue. Cut the excess material and the marks left by production away with a sharp blade a little from the part and sand the area down. Wash and degrease the rims before painting; then apply the metallic shade in thin layers, as a heavy layer clogs the fine drawing of the spokes.
For modelers who are building a particular car and want the correct wheel pattern on it. The kit, paints and glue are not included, unless stated otherwise.
Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.
Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.
There are no questions here yet. Be the first to ask!