Flat Spherical Rivet 1.2 mm are modeling rivets with a flattened round head of 1.2 mm from the GAS HANS brand. They have a lower profile than full round-head rivets.
Responsibility details are not available.
Rivets with a flattened round head in the 1.2 mm size from the range of small modeling material of the GAS HANS brand. The shape of the head stands somewhere between the full round and the entirely flat variant: the profile is lower, but the edge stays rounded, so on the surface the rivet creates a soft transition instead of a sharp step. It is not a kit but an accessory with which riveted joints on a model are added to or replaced.
A lower head forgives small inaccuracies in placement, but it is harder to catch with tweezers, so it pays to work under good light and on a surface a tiny part cannot roll off. Sand the surface beforehand and get the dust off it. Because the flattened shape does not cast as pronounced a shadow as a full sphere, the surface gets its character chiefly from the painting: use a wash to bring out the outline of the head and only then any matte coats. Try the arrangement dry first so that you know how much room will be left on the surface.
For modelers who want more shapes of rivet head to hand and want to use them to tell individual types of joint on one model apart. It suits builders of armored vehicles, the authors of their own parts and diorama scenes.
Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.
Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.
There are no questions here yet. Be the first to ask!
