29.–30. 10. z technických důvodů zavřeno. / Closed 29–30 October for technical reasons.
1:32 A-6A Intruder 3D-Printed & coloured Interior on decal paper (Trumpeter)

1:32 A-6A Intruder 3D-Printed & coloured Interior on decal paper (Trumpeter)

46.36 €
Add to Cart

1:32 A-6A Intruder 3D-Printed & coloured Interior on decal paper (Trumpeter)

1:32 A-6A Intruder 3D printed colored interior on decal paper is a Quinta Studio accessory set for the Trumpeter kit. It is not an aircraft model but an interior detail.

Scale1:32
Manufacturer Quinta Studio
Product EAN5591111000009

Responsibility details are not available.

46.36 €
38.31 € without VAT
In stock
Free shipping on orders over 1,000 czk in czech republic Personal pickup in Prostějov 14-day returns

About product

A-6A Intruder in 1:32 scale, a 3D printed colored interior

The Quinta Studio set is 3D printed directly onto decal paper and is supplied already painted. These are not resin parts to be glued but a decal with a real thickness and three-dimensional relief, applied the wet way. The set is cut for the Trumpeter kit in 1:32 scale. Because this is a two-seat aircraft with a richly equipped cockpit, the item is among the more extensive sets of the line. A reduced version marked as Small version is made as well; the exact designation tells them apart, so check which variant you want before ordering.

The real subject

The Grumman A-6 Intruder was an American carrier-borne attack aircraft with two turbojets, meant for precise all-weather strikes. The A-6A version was the first production form. Its characteristic feature is the cockpit with two seats side by side, where the right place belonged to the navigator and weapon systems officer, with his seat set slightly back and lower. That layout is the key one for modelers: the cockpit is wide, well visible under the large glazing and full of instruments, so a colored three-dimensional interior shows in it to the full.

How the set is applied

Spray the cockpit area with a dark base color. Cut the elements out with a sharp scalpel, soak them in warm water and slide them into place; the position can be adjusted with a brush and water and the excess moisture blotted away with a cotton swab. Do not use a decal softener or a setting solution, because their chemistry would damage the printed resin and ruin the element. Only press the element down with a soft brush and do not run the brush over the surface, or the relief risks smearing or tearing. On curved areas work in two stages with drying in between. Even the finished interior out with a matte varnish and bring the dials to life with a drop of gloss varnish.

Who the set is for

  • Builders in the large 1:32 scale who want a rich cockpit with no hand painting.
  • Modelers of American carrier-borne equipment.
  • Anyone interested in two-seat attack aircraft with side-by-side cockpits.
  • Those who build a model with the glazing open.

This is an accessory set, not a model. The kit, paints and glue are not included in the package.

Reviews

No reviews yet Have you built this one? Tell other modellers how it went and help them choose.

Forum

Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.

Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.

There are no questions here yet. Be the first to ask!

FAQ

The wet way, like a decal. Cut the element out, soak it in warm water and slide it into place. Nothing is glued or sanded.

Yes. The printed 3D layer is thicker and a decal softener or a setting solution would damage it, so do not use them.

In extent. Both variants are made and the exact designation in the name tells them apart, so check which one you want before ordering.

No. This is an accessory to a model; the kit has to be bought separately and the set is cut for a particular release.

Last seen

Quinta StudioQD321081:32

1:32 A-6A Intruder 3D-Printed & coloured Interior on decal paper (Trumpeter)

1:32 A-6A Intruder 3D printed colored interior on decal paper is a Quinta Studio accessory set for the Trumpeter kit. It is not an aircraft model but an interior detail.
In stock
46.36 €
ReskitRS72-00711:72

1:72 North-American F-100D/F-100F Super Sabre

Reskit 1:72 wheels set for the North American F-100D / F-100F Super Sabre is a resin detail set of replacement wheels. It is not a model but an accessory with which you refine the landing gear of F-100 Super Sabre models.
In stock
7.16 €
LifecolorLIFUA615

UA615 - Italian Regia Marina Grigio Piombo Ponte

The decks of Italian warships had a gray tone of their own, and that is exactly what Italian Regia Marina Grigio Piombo Ponte from the Lifecolor acrylic range offers. A water-based acrylic paint for the horizontal surfaces of Regia Marina models.
In stock
2.76 €
1:35 Refugees (2) Koera war 1950/51 Sister and Brother-25 %Stock ClearanceFavorite
DEF ModelDF350211:35

1:35 Refugees (2) Koera war 1950/51 Sister and Brother

A set of civilian figures in 1:35 scale: a pair of siblings, a sister and a brother, from the period of the Korean War.
Last one!
19.16 €14.36 € You save 4.80 €
ELEFANTEL550081:35

1:35 D. A.K. PALM SYMBOLS - WHITE, 240 PALMS IN 24 VARIANTS

ELEFANT D.A.K. Palm Symbols - white 1:35 is a decal set with the white palm insignia of the German Africa Corps, 240 palms in 24 variants in all.
In stock
6.36 €
Ukrainian Scale Cars Production (USCP)U24A0901:24

1:24 Ferrari 550 Maranello Interior Detail-Up (For Fujimi)

A set for refining the interior of a Ferrari 550 Maranello model in 1:24 scale. According to the name it is prepared for the kit from the firm Fujimi.
In stock
19.16 €
Special HobbySH482181:48

1:48 L-4 Grasshopper ‘From Africa to Central Europe’

Piper L-4 Grasshopper 1:48 From Africa to Central Europe is an injection-molded plastic kit of the light liaison aircraft from Special Hobby, released as a new mold.
In stock
23.56 €
ŘOP o.s.MNFDL720011:72

1:72 Bristol Blenheim Mk I - Blenheims in the RAF service

The waterslide decal set Bristol Blenheim Mk I - Blenheims in the RAF service (1:72) from ROP o.s., with the markings of RAF machines.
In stock
7.96 €
PANZER ARTGB35-1011:35

1:35 L7 Gun barrel for IDF Shot Kal “Alef” tank

An L7 gun barrel for the Israeli Shot Kal tank in 1:35 scale from PANZER ART. An accessory for the first Israeli form of the Centurion.
In stock
13.96 €
Loading, please wait...

Setting consent to personalization

With your consent, we may use the information below for the following purposes or share it with selected partners. You can adjust your settings for individual purposes (types of processing) and confirm your choice with the "Save settings" button:

Always active

Necessary cookies

These are technical files that are necessary for the correct behavior of our website and all its functions. They are used, among other things, to store products in the shopping cart, display products on request, control filters, personal settings and also set consent to the use of cookies. Your consent is not required for these cookies and it is not possible to remove it.

Analytical cookies

They count website traffic and, by collecting anonymous statistics, enable the operator to better understand their visitors and thus constantly improve the site.

Marketing cookies

They collect information to better tailor advertising to your interests, both on and off this website.

Setting consent to personalization

To make it easier for you to browse the site, to offer you customized content or advertising, and to analyze traffic anonymously, we use cookies that we share with our partners for social media, advertising, and analytics. You can adjust their settings with the "Edit settings" link and you can change it at any time in the footer of the website. You can find more detailed information in our Policy on the protection of personal data and the use of cookies.