1:32 Bf-109E

A masking set for a model of the Messerschmitt Bf 109E fighter in 1:32 scale.

Scale1:32
Manufacturer Dead Design
Product EAN8591111732574

Responsibility details are not available.

8.76 €
7.24 € without VAT
In stock
Free shipping on orders over 1,000 czk in czech republic Personal pickup in Prostějov 14-day returns

About product

The real subject

The Messerschmitt Bf 109E, nicknamed Emil among airmen, was the main German fighter of the first two years of the war and the machine that met Spitfires over England in 1940. It was powered by an inverted Daimler-Benz DB 601 V12 with direct fuel injection, thanks to which the engine did not cut out under negative g. The Emil is recognized by its angular canopy with dense framing and by the struts bracing the tail surfaces. It is precisely that framing that makes a model of the Bf 109E a rewarding but laborious job for anyone masking with tape.

What the set offers

This is a masking set for a model of the Bf 109E in 1:32 scale. The masks are pre-cut, so they go straight onto the part and you do not have to cut shapes out of tape. The extent of the coverage and the recommended order of steps are given in the manufacturer's instructions, as is the kit the masks are cut for; go through them before painting.

  • A masking set for the Bf 109E in 1:32 scale
  • Pre-cut shapes, no need to cut adhesive tape
  • Sharp frame edges without paint creeping under
  • Suitable for brushing too, only with more careful application

How to use the masks

The masks are applied before spraying, not after the paint has dried. The surface has to be clean and degreased, otherwise the mask will not seat and the paint will creep under. Press it down all round, best with a toothpick or blunt tweezers, and lay the paint on in several thin coats. Lift it off at a sharp angle before the finish has fully cured. With the Emil it pays to spray the inner cockpit shade first and only then do the outer masking and the top color.

Who it is for

For modelers who want the cockpit frames sharp and straight without hours spent with a scalpel, and especially for a build in a large scale, where every inaccurate edge shows. The model, paints and glue are not part of the delivery, unless stated otherwise.

Reviews

No reviews yet Have you built this one? Tell other modellers how it went and help them choose.

Forum

Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.

Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.

There are no questions here yet. Be the first to ask!

FAQ

A masking set for a model of the Bf 109E in 1:32 scale. The extent of the coverage is given in the manufacturer's instructions. The model and paints are not included, unless stated otherwise.

The particular kit is given in the manufacturer's instructions. The masks are cut to the shape of the parts, so it is worth checking that before buying paint and before the build.

They are applied before spraying onto a clean, degreased surface, pressed down all round, and the paint is laid on in thin coats. They are taken off before the finish cures.

By its angular canopy with dense framing, the struts on the tail surfaces and the inverted DB 601 V12.

Last seen

Dead DesignNM320531:32

1:32 Bf-109E

A masking set for a model of the Messerschmitt Bf 109E fighter in 1:32 scale.
In stock
8.76 €
RP ToolzRP-LHPD

Large Hexagonal Punch & Die

Large Hexagonal Punch & Die from RP Toolz is a large hexagonal punch set with which you cut accurate hexagons from thin material to imitate bolts, nuts and hatches.
In stock
85.96 €
VallejoVALSC1201:35

1:35 Railroad Buffer Block

A buffer stop at the end of a railroad track in 1:35 size. A small but eloquent element for station and siding scenes.
In stock
23.56 €
Mr.PaintMRP-A092

MRP-A092 LIGHT GREEN

An acrylic airbrush shade, Mr.Paint Light Green : a light green from the water-thinnable Aqua line, 17 ml.
In stock
3.16 €
SX-ArtSXA20043

Stencil Russian alphabet type 1 (height 8mm)

A stencil with the letters of the Cyrillic alphabet for applying lettering to models and dioramas. The type 1 rendition, 8 mm letter height.
In stock
7.96 €
Quinta StudioQR430031:43

1:43 ZIL-130 - Floor Mat Type 2 (for Zvezda Kits)

Quinta Studio 1:43 ZIL-130 - floor mat Type 2 is a 3D printed color accessory on decal paper that gives the cab of the model a realistic floor mat with a different pattern.
In stock
2.36 €
AberABR160171:16

1:16 Panther G- Vol.2- Fenders

Photo-etched fenders for the Panther Ausf. G, Vol.2 in the large 1:16 scale from the Polish maker Aber. A metal replacement for the plastic fenders of the German tank: it is not a model but a detail accessory.
In stock
48.36 €
Loading, please wait...

Setting consent to personalization

With your consent, we may use the information below for the following purposes or share it with selected partners. You can adjust your settings for individual purposes (types of processing) and confirm your choice with the "Save settings" button:

Always active

Necessary cookies

These are technical files that are necessary for the correct behavior of our website and all its functions. They are used, among other things, to store products in the shopping cart, display products on request, control filters, personal settings and also set consent to the use of cookies. Your consent is not required for these cookies and it is not possible to remove it.

Analytical cookies

They count website traffic and, by collecting anonymous statistics, enable the operator to better understand their visitors and thus constantly improve the site.

Marketing cookies

They collect information to better tailor advertising to your interests, both on and off this website.

Setting consent to personalization

To make it easier for you to browse the site, to offer you customized content or advertising, and to analyze traffic anonymously, we use cookies that we share with our partners for social media, advertising, and analytics. You can adjust their settings with the "Edit settings" link and you can change it at any time in the footer of the website. You can find more detailed information in our Policy on the protection of personal data and the use of cookies.