The resin correction part a correct oil cooler for the Bf 109G-10 from the Czech brand Quickboost in 1:32 scale - an accessory, not a model kit.
Responsibility details are not available.
This resin accessory from the Quickboost brand in 1:32 scale offers a precisely shaped oil cooler for a model of the German fighter the Messerschmitt Bf 109G-10. It is not a kit of the airplane, but a small correction part that replaces a less faithful part from a plastic kit and gives the lower fuselage under the engine a realistic look.
The Bf 109G-10 was one of the most capable late versions of this fighter, powered by a stronger engine. The oil cooler was housed in a bath under the forward fuselage, and its shape on the late versions differed from the earlier machines. A faithfully shaped cooler with sharp definition of the fins is therefore among the details that decide how convincing a finished model is.
First wash the resin parts in lukewarm soapy water because of the mold release residue. Cut the casting block off with a saw or a cutter, sand the surface and protect your airways when sanding resin. Glue the part with super glue (cyanoacrylate); apply a primer before painting, which improves the adhesion of paint on smooth resin.
It is supplied as a resin accessory for experienced modelers, not as a kit in its own right. Paints, glue and the base model are not included in the package.
Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.
Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.
There are no questions here yet. Be the first to ask!
