1:32 Boeing F/A-18E/F/A-18F/F/A-18G SUPER HORNET Type 2 exhaust nozzles

1:32 Boeing F/A-18E/F/A-18F/F/A-18G SUPER HORNET Type 2 exhaust nozzles

17.68 €
Add to Cart

1:32 Boeing F/A-18E/F/A-18F/F/A-18G SUPER HORNET Type 2 exhaust nozzles

The Reskit type 2 exhaust nozzles for the Super Hornet in 1:32 scale replace the simplified plastic nozzles with a resin casting. It is an accessory, not a kit.

Scale1:32
Manufacturer Reskit
Product EAN8591111000000

Responsibility details are not available.

23.56 € 17.68 €
14.61 € without VAT
−25 % You save 5.88 €
In stock
Free shipping on orders over 1,000 czk in czech republic Personal pickup in Prostějov 14-day returns

About product

Reskit type 2 exhaust nozzles for the Super Hornet in 1:32 scale

A resin replacement for the exhaust nozzles for the twin-engine carrier aircraft of the Super Hornet family, in the form designated as type 2. It is neither a model of the aircraft nor a part of one to be built on its own: it is a replacement part fitted in place of the nozzles from the box. In the large 1:32 scale the rear end of the aircraft is practically always at the viewer's eye level, so this is where an investment in detail pays back fastest.

The real subject

The exhaust nozzle of a jet engine with an afterburner is made up of movable petals whose angle changes the cross section according to the engine setting. On the Super Hornet family two different forms of nozzle occur in service and modelers distinguish them as type 1 and type 2. Which of them a particular machine had is recognized from a photograph, not from the type designation of the aircraft, so it is worth verifying the real thing before you start building the rear end.

Usage and painting tips

Most of the work on a nozzle goes into painting, not gluing. The key is that the inner and the outer surface look different: inside, heat-tinted tones prevail, while on the outer petals there is weathered dark metal with hints of blue and brown. Spray the inside first, mask it and only then do the outside. Before painting, wash the mold release off the part and apply primer; metallic paints are merciless to an imperfect base and show every scratch. It is glued with cyanoacrylate, and the joint with the fuselage can be evened out with fine filler.

Who the set is for

  • Builders of the Super Hornet in 1:32 scale who have verified the type 2 form
  • Modelers working with metallic shades and transitions
  • Those who detail the rear end of a model and want a faithful view into the nozzle
  • More advanced modelers with experience of resin

The accessory is supplied unpainted. The set is cut for one specific kit, which the name states; please check the match with the model you are building before you buy. The base kit, glue and paints are not included in the package.

Reviews

No reviews yet Have you built this one? Tell other modellers how it went and help them choose.

Forum

Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.

Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.

There are no questions here yet. Be the first to ask!

FAQ

From a photograph of the particular machine you are building. It cannot be determined reliably from the type designation of the aircraft.

No. The parts are made exclusively for 1:32 scale; in a smaller scale they would be grossly oversized.

Spray primer, then the base metallic tone and paint the transitions in thin coats. Leave the inside of the nozzle warmer and the outer petals darker and more weathered.

The number of parts is stated on the packaging of the set. The set is intended for the nozzles of a twin-engine aircraft.

Last seen

1:32 Boeing F/A-18E/F/A-18F/F/A-18G SUPER HORNET Type 2 exhaust nozzles-25 %Stock ClearanceFavorite
ReskitRSU32-00031:32

1:32 Boeing F/A-18E/F/A-18F/F/A-18G SUPER HORNET Type 2 exhaust nozzles

The Reskit type 2 exhaust nozzles for the Super Hornet in 1:32 scale replace the simplified plastic nozzles with a resin casting. It is an accessory, not a kit.
4 leftof 6
23.56 €17.68 € You save 5.88 €
DragonDR73591:72

1:72 Pz.Kpfw.IV Ausf.F2(G)

The injection-molded plastic kit Pz.Kpfw.IV Ausf.F2(G) in 1:72 scale from the maker Dragon: the German Second World War medium tank with the long 75 mm gun barrel.
In stock
24.36 €
TrumpeterTR005121:35

1:35 American machine gun AR-15/M16/M4 FAMILY SR 25

A set of American small arms in 1:35: rifles and carbines of the AR-15, M16 and M4 family complemented by the SR-25 precision rifle. An accessory for figures and for a diorama.
In stock
2.36 €
Ichibansho Evangelion Acrylic Stand - Asuka Shikinami Langley (Operation Started!)-25 %Stock ClearanceFavorite
BandaiBANBP17905

Ichibansho Evangelion Acrylic Stand - Asuka Shikinami Langley (Operation Started!)

An Ichibansho acrylic stand with the motif of the character Asuka Shikinami Langley from the world of Evangelion is a finished collector item from the Operation Started! range. You only need to unpack it and stand it up.
Last one!
18.36 €13.76 € You save 4.60 €
Artwox ModelBM100011:350

1:350 USS Battleship Missouri Deck Masking Sheet (For Very fire VF350003)

A sheet of pre-cut painting masks from Artwox Model for the deck of the battleship Missouri in 1:350 scale. It is neither a model nor a wooden deck but an aid for spraying the deck areas accurately.
In stock
11.16 €
PANZER ARTRE35-0971:35

1:35 Transmission cover for Sherman Tank (Mid model) Dragon & Tasca Kits

The PANZER ART 1:35 Transmission cover for Sherman Tank (Mid model) is a resin front transmission cover for the mid production version of the Sherman tank.
In stock
7.16 €
Quinta StudioQD483871:48

1:48 F-4E early with slatted wing 3D-Printed & coloured Interior on decal paper (Meng)

3D-printed color interior decals for the F-4E in the early form with a slatted wing, 1:48 scale. The set is cut for the Meng kit.
In stock
43.16 €
Art ScaleASKS480061:48

1:48 B-26 Marauder early seat belts - 3D printed decals by ASK

B-26 Marauder early, seat belts 1:48 as a 3D printed self-adhesive decal from Art Scale (ASK). Colored relief straps with buckles for the early forms of the bomber, with no painting.
In stock
3.96 €
EduardEX6901:48

1:48 North-American P-51D-5 Mustang TFace

1:48 North American P-51D-5 Mustang TFace from Eduard is a mask set that covers the outer as well as the inner side of the glazing. It lets you paint the canopy frames in the interior shade from inside and in camouflage from outside.
In stock
9 €
Loading, please wait...

Setting consent to personalization

With your consent, we may use the information below for the following purposes or share it with selected partners. You can adjust your settings for individual purposes (types of processing) and confirm your choice with the "Save settings" button:

Always active

Necessary cookies

These are technical files that are necessary for the correct behavior of our website and all its functions. They are used, among other things, to store products in the shopping cart, display products on request, control filters, personal settings and also set consent to the use of cookies. Your consent is not required for these cookies and it is not possible to remove it.

Analytical cookies

They count website traffic and, by collecting anonymous statistics, enable the operator to better understand their visitors and thus constantly improve the site.

Marketing cookies

They collect information to better tailor advertising to your interests, both on and off this website.

Setting consent to personalization

To make it easier for you to browse the site, to offer you customized content or advertising, and to analyze traffic anonymously, we use cookies that we share with our partners for social media, advertising, and analytics. You can adjust their settings with the "Edit settings" link and you can change it at any time in the footer of the website. You can find more detailed information in our Policy on the protection of personal data and the use of cookies.