1:32 Fw-190 D-9

The masking of the cockpit is arranged from the outside as well as the inside, the set holds two insignia sets and a pair of metal machine gun muzzles. Intended for a large model of the late Focke-Wulf with the V engine.

Scale1:32
Manufacturer Montex
Product EAN8591111167550

Responsibility details are not available.

23.56 €
19.47 € without VAT
In stock
Free shipping on orders over 1,000 czk in czech republic Personal pickup in Prostějov 14-day returns

About product

Special flights over the airfields of the jets

The first unit to re-equip with the late Focke-Wulfs with the V engine was Jagdgeschwader 26 in the autumn of 1944. Some of the machines ended up with special flights whose task was to guard the surroundings of the airfields of the jet Messerschmitts; those were almost defenseless during takeoff and landing and the fighters circled above them like a living fence. So that their own anti-aircraft defense would not fire at them, the lower surfaces were given conspicuous red and white striping, after which the machines came to be nicknamed after parrots. In January 1945 hundreds of these aircraft took part in a mass strike on Allied airfields in the Netherlands and Belgium.

Equipment of the set

Films for the glazing for both sides, two sets of national insignia and two turned metal pieces representing the muzzles of the 13 mm machine guns.

How metal changes light

Matte paint scatters light; a metal surface returns it in a narrow band along an edge. On a model such a reflection is almost always unwanted, because it gives the scale away. The muzzle of a weapon, however, is one of the few places where a reflection helps: the eye reads it as a view into a dark opening with a thin light rim, and that is exactly how a real barrel looks. It therefore pays not to paint the metal part over fully but only to darken it and let the rim of the muzzle stand out.

The order of the steps in the build

First build and paint the whole model, including the final protective coat. Leave the drilling of the holes to the very end and do it by hand so that the surrounding paint does not fray. The metal pieces then only have to be inserted and secured with a minute amount of cyanoacrylate applied to the shank, not into the hole.

Reviews

No reviews yet Have you built this one? Tell other modellers how it went and help them choose.

Forum

Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.

Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.

There are no questions here yet. Be the first to ask!

FAQ

The frame of the glazing is visible through the glass as well. The second film makes it possible to spray the inner side of the frame so that the edges are sharp.

Darkening them and leaving the rim of the muzzle glossy is recommended. Painting them over completely suppresses the reflection and the opening loses its depth.

It was a recognition marking for the flights patrolling over the airfields of the jets, so that their own anti-aircraft defense would not mistake them.

Masks replace the national insignia; the other marking is not stated here, so count on decals separately.

Last seen

MontexMXKAM320101:32

1:32 Fw-190 D-9

The masking of the cockpit is arranged from the outside as well as the inside, the set holds two insignia sets and a pair of metal machine gun muzzles. Intended for a large model of the late Focke-Wulf with the V engine.
In stock
23.56 €
EduardED64811751:48

1:48 AIM-7 M Sparrow

Eduard 1:48 AIM-7M Sparrow is a resin set of air-to-air guided missiles in 1:48 scale. It is a detail accessory for the ordnance of models, not a kit.
In stock
11.80 €
AK interactiveRC909

Medium Blue Grey FS 35237 17 ml.

Medium Blue Grey, a blue-gray shade from the Real Colors acrylic range by AK Interactive, manufacturer's part number RC909. A 17 ml bottle; the shade is pinned down in its name by the number FS 35237.
In stock
2.76 €
ReskitRS72-03321:72

1:72 Dornier Do-335B Pfeil wheels set (weighted)

Reskit Dornier Do 335 B Pfeil wheels, weighted, 1:72 is an aftermarket resin set of replacement wheels with flattened tires for models of this heavier version of the German Pfeil.
In stock
6.76 €
Loading, please wait...

Setting consent to personalization

With your consent, we may use the information below for the following purposes or share it with selected partners. You can adjust your settings for individual purposes (types of processing) and confirm your choice with the "Save settings" button:

Always active

Necessary cookies

These are technical files that are necessary for the correct behavior of our website and all its functions. They are used, among other things, to store products in the shopping cart, display products on request, control filters, personal settings and also set consent to the use of cookies. Your consent is not required for these cookies and it is not possible to remove it.

Analytical cookies

They count website traffic and, by collecting anonymous statistics, enable the operator to better understand their visitors and thus constantly improve the site.

Marketing cookies

They collect information to better tailor advertising to your interests, both on and off this website.

Setting consent to personalization

To make it easier for you to browse the site, to offer you customized content or advertising, and to analyze traffic anonymously, we use cookies that we share with our partners for social media, advertising, and analytics. You can adjust their settings with the "Edit settings" link and you can change it at any time in the footer of the website. You can find more detailed information in our Policy on the protection of personal data and the use of cookies.