1:32 Hawker Hurricane Mk.I, IIb part 14 - Royal Air Force over Egypt

1:32 Hawker Hurricane Mk.I, IIb part 14 - Royal Air Force over Egypt

11.96 €
Add to Cart

1:32 Hawker Hurricane Mk.I, IIb part 14 - Royal Air Force over Egypt

Art Scale 1:32 Hawker Hurricane Mk.I and Mk.IIb, part 14 is a sheet of waterslide decals for models of the British Hurricane fighter, aimed at the machines of the Royal Air Force deployed over Egypt.

Scale1:32
Manufacturer Art Scale
Product EAN8591111480673

Responsibility details are not available.

11.96 €
9.88 € without VAT
In stock
Free shipping on orders over 1,000 czk in czech republic Personal pickup in Prostějov 14-day returns

About product

Art Scale 1:32 Hawker Hurricane Mk.I and Mk.IIb, part 14: decals

A sheet of waterslide decals by the manufacturer Art Scale for models of the Hawker Hurricane fighter aircraft in the Mk.I and Mk.IIb versions in 1:32 scale. Thematically it is aimed at the machines of the Royal Air Force deployed over Egypt. It is the fourteenth part of the line that the manufacturer issues for this type. It is not a kit but an accessory: the decals are applied to a model that has been painted and finished.

The real subject

The Hurricane was the first production fighter monoplane of the Royal Air Force with a retractable undercarriage. The Mk.I version had a Rolls-Royce Merlin engine and an armament made up of eight machine guns in the wing. The Mk.IIB received a more powerful Merlin with a two-speed supercharger and the number of machine guns rose to twelve. In the North African and Egyptian area the Hurricanes were used both as fighters and as strike machines; a typical feature of the period was the bulky dust filter under the nose, which protected the engine from sand.

How to work with the decals

Waterslide decals hold reliably only on a smooth glossy base. First spray the surface with a gloss varnish, therefore, and let it cure thoroughly. Dip the decal briefly, leave it to rest on its paper until the backing releases, and slide it into place. Soak the excess water up with a paper towel and apply a decal softener, so that the decal settles onto the engraved lines and onto the fabric covering of the rear part of the fuselage, which on the Hurricane has pronounced ribbing. Once dry, varnish the model with a matte coat, so that the edges disappear and the surface is unified.

Who the sheet is for

  • builders of large models of the Hurricane in 1:32 scale
  • modelers with an interest in the deployment of the Royal Air Force in North Africa
  • those who want to finish a model in markings other than those the kit offers
  • collectors of the successive parts of decal lines for one type

Reviews

No reviews yet Have you built this one? Tell other modellers how it went and help them choose.

Forum

Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.

Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.

There are no questions here yet. Be the first to ask!

FAQ

Check the number of schemes and the particular machines depicted against the instructions enclosed with the sheet.

It is not. It is a decal sheet for a model in 1:32 scale; the kit itself needs to be obtained separately.

The Mk.IIB had a more powerful variant of the Merlin engine and twelve machine guns in the wing instead of the eight of the Mk.I. They also differ in small details on the nose and in their equipment.

The Hurricane has a fabric covering with pronounced ribbing on the rear part of the fuselage. Without a softener the decal would not settle across the ribs and the edges would stay visible.

Last seen

Art ScaleASKD320401:32

1:32 Hawker Hurricane Mk.I, IIb part 14 - Royal Air Force over Egypt

Art Scale 1:32 Hawker Hurricane Mk.I and Mk.IIb, part 14 is a sheet of waterslide decals for models of the British Hurricane fighter, aimed at the machines of the Royal Air Force deployed over Egypt.
In stock
11.96 €
Dead DesignUC320111:32

1:32 Mitsubishi A6M5c (1980) undercarriage bay paint masks

The Mitsubishi A6M5c landing gear bay masks 1:32 are cut to the shape of a particular bay, so it pays to lay them on dry before applying them.
In stock
6.36 €
KelikKS480361:48

1:48 Israel Flag - Base - Acrylic 3mm (410x270mm) (410g)

1:48 Israel Flag is a sizeable printed board with the flag of Israel for finished models in 1:48 scale.
In stock
41.56 €
New WareNWAM07031:72

1:72 Sikorsky H-53 Sea Stallion EXPERT kabuki masks

1:72 Sikorsky H-53 Sea Stallion EXPERT kabuki masks is a set of masking parts in kabuki tape for the model of this helicopter in 1:72 scale, in the version marked EXPERT. An accessory for a model, not a kit.
In stock
7.96 €
SX-ArtSXA720601:72

1:72 A-7P Corsair II Painting mask (HOBBYB)

1:72 A-7P Corsair II painting mask (SX-Art) is a set of self-adhesive painting masks for a clean finish on a model of this jet attack aircraft.
In stock
4.76 €
J´s WorkPPA51581:35

Airbrush CAMO-MASK for 1/35 Mk. I Camouflage Scheme 1

Js Work Airbrush CAMO-MASK masking films for camouflage scheme 1 of the Mark I tank in 1:35 scale. Pre-cut self-adhesive masks for applying camouflage with an airbrush, not a paint and not a model.
In stock
6.76 €
1:35 German Man 5t. mil gl Truck Sagged wheel set 2 Continetal HCS-25 %Stock ClearanceFavorite
DEF ModelDW351261:35

1:35 German Man 5t. mil gl Truck Sagged wheel set 2 Continetal HCS

A set of replacement wheels with weighted tires in the Continental HCS tread pattern for the model of the German MAN 5t mil gl truck in 1:35 scale.
Last one!of 4
22.76 €17.08 € You save 5.68 €
IBG modelsIBG725431:72

1:72 Focke-Wulf Fw-190 D-9 - Jagdgeschwadere 301

Focke-Wulf Fw 190 D-9 - Jagdgeschwader 301 is a plastic kit of the German fighter in 1:72 scale from IBG models.
In stock
19.16 €
Dead DesignUC320061:32

1:32 Nakajima Ki-84 Hayate undercarriage bay paint masks

Landing gear bay masks for the Nakajima Ki-84 Hayate in 1:32 scale. The ready-made shapes replace cutting tape by hand and make sure the left and the right bay look the same.
In stock
6.36 €
MAiMMAIM350031:35

1:35 Bundeswehr ISAF Patrol in Afghanistan #2

A resin figure, Bundeswehr, an ISAF patrol in Afghanistan no. 2 , in 1:35 scale from MAiM: a modern German soldier in the field.
In stock
13.96 €
Loading, please wait...

Setting consent to personalization

With your consent, we may use the information below for the following purposes or share it with selected partners. You can adjust your settings for individual purposes (types of processing) and confirm your choice with the "Save settings" button:

Always active

Necessary cookies

These are technical files that are necessary for the correct behavior of our website and all its functions. They are used, among other things, to store products in the shopping cart, display products on request, control filters, personal settings and also set consent to the use of cookies. Your consent is not required for these cookies and it is not possible to remove it.

Analytical cookies

They count website traffic and, by collecting anonymous statistics, enable the operator to better understand their visitors and thus constantly improve the site.

Marketing cookies

They collect information to better tailor advertising to your interests, both on and off this website.

Setting consent to personalization

To make it easier for you to browse the site, to offer you customized content or advertising, and to analyze traffic anonymously, we use cookies that we share with our partners for social media, advertising, and analytics. You can adjust their settings with the "Edit settings" link and you can change it at any time in the footer of the website. You can find more detailed information in our Policy on the protection of personal data and the use of cookies.