1:32 Lockheed F-104A Starfighter cockpt set - late version

1:32 Lockheed F-104A Starfighter cockpt set - late version

29.60 €
Add to Cart

1:32 Lockheed F-104A Starfighter cockpt set - late version

A set for the cockpit of a model of the Lockheed F-104A Starfighter in 1:32 scale, in a rendition matching the later machines. An accessory for builders for whom the cockpit from the basic kit is not enough.

Scale1:32
Manufacturer Aires
Product EAN0791111871870

Responsibility details are not available.

29.60 €
24.46 € without VAT
3 pcs in stock
Free shipping on orders over 1,000 czk in czech republic Personal pickup in Prostějov 14-day returns

About product

The real subject

The Lockheed F-104 Starfighter is a fighter of the second half of the 1950s, built around speed and rate of climb. You will recognize it at first glance: a long slender fuselage, a short thin trapezoidal wing with very sharp edges and a horizontal tail surface set right on top of the fin. It was powered by a single jet engine. The F-104A version was the first production rendition for the US Air Force. Early machines had an ejection seat that fired the pilot downward beneath the aircraft; later a seat firing upward was adopted, and with it the equipment of the cockpit changed as well.

What the set offers

The set aims at the cockpit, that is the place most visible in the large 1:32 scale, especially when the canopy is left open. The rendition matches the later machines. The exact make-up of the parts and the extent of the reworking of the fuselage are in the manufacturer's instructions.

  • A set for the cockpit of the F-104A Starfighter in 1:32 scale
  • A rendition for the later machines
  • It stands out on a model with the canopy open
  • The parts are not polystyrene; they are joined with super glue

Building and painting tips

Cut the surplus material away with a sharp blade a little way from the part and carefully sand the rest off. Wash and degrease the parts before painting, otherwise the paint holds badly on them. Finish and paint the cockpit before you glue the fuselage halves together, because afterwards it can no longer be reached. It pays to keep trying dry how much material still has to be taken off, so that the parts seat into the fuselage. The broken-up detail is brought out by a dark wash into the recesses and a light dry brush along the edges.

Who it is for

For modelers who are building the Starfighter in a large scale and want a richer cockpit than the basic kit offers. The model, paints and glue are not included in the package, unless stated otherwise.

Reviews

No reviews yet Have you built this one? Tell other modellers how it went and help them choose.

Forum

Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.

Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.

There are no questions here yet. Be the first to ask!

FAQ

It is fitted into the cockpit area in place of the parts from the kit. How much material has to be taken off and how the parts are seated is given in the manufacturer's instructions; proceed with dry fits.

They are not polystyrene, so ordinary cement for plastic does not apply to them. Use super glue and wash and degrease the parts beforehand.

It is intended for models of the F-104A in 1:32 scale. The particular kit the set is cut for is given in the manufacturer's instructions.

The gain is greatest with the canopy open. Under a closed clear part considerably less is visible, but the seat and the instrument section still tell.

Last seen

AiresAIR22781:32

1:32 Lockheed F-104A Starfighter cockpt set - late version

A set for the cockpit of a model of the Lockheed F-104A Starfighter in 1:32 scale, in a rendition matching the later machines. An accessory for builders for whom the cockpit from the basic kit is not enough.
In stock
29.60 €
HatakaHTK-CS46

Polish Navy / Air Force TS-11 paint set

Six lacquer paints for the Polish TS-11 Iskra jet trainer in the navy versions. It holds the dark and light upper surfaces, the green and blue of the training-reconnaissance variant and a separate tone for the cockpit.
In stock
15.96 €
Firma4949C042/481:48

1:48 Lavor with a jug

A washbowl with a jug in 1:48 scale. A small accessory for a diorama that sets the setting and the period at first glance.
In stock
4.36 €
TrumpeterTR003821:35

1:35 Polish PT-76B Amphibious Tank

A plastic model of the PT-76B in 1:35 scale from Trumpeter . An amphibious light reconnaissance tank of Soviet design, here in the form used by the Polish Army. The model is supplied unassembled and unpainted.
In stock
18.36 €
Hobby BossHB803271:48

1:48 F4F-3 (Late) “WILDCAT”

An injection-molded plastic kit of the F4F-3 Wildcat (Late) in 1:48 scale from manufacturer Hobby Boss.
In stock
14.76 €
VallejoVALB06006

Brush - Shader - Filbert Synthetic No. 6

Vallejo Brush Shader Filbert Synthetic No. 6 is a synthetic brush with a filbert (rounded flat) shape from the Shader range, intended for shading and for applying glazes and filters to medium-sized areas.
In stock
3.96 €
PeewitPWM1440221:144

1:144 Dassault Mirage III

A set of die-cut self-adhesive masks, Peewit 1:144 Dassault Mirage III , for the cockpit glazing. An accessory for building the model, not a kit.
In stock
3.16 €
ETA dioramaETA4161:72

1:72/1:76 US Maps D-Day Normandy

1:72/1:76 US Maps D-Day Normandy is a printed paper accessory for dioramas: reduced period maps of the landings in Normandy for models in 1:72 and 1:76 scale.
In stock
3.96 €
Loading, please wait...

Setting consent to personalization

With your consent, we may use the information below for the following purposes or share it with selected partners. You can adjust your settings for individual purposes (types of processing) and confirm your choice with the "Save settings" button:

Always active

Necessary cookies

These are technical files that are necessary for the correct behavior of our website and all its functions. They are used, among other things, to store products in the shopping cart, display products on request, control filters, personal settings and also set consent to the use of cookies. Your consent is not required for these cookies and it is not possible to remove it.

Analytical cookies

They count website traffic and, by collecting anonymous statistics, enable the operator to better understand their visitors and thus constantly improve the site.

Marketing cookies

They collect information to better tailor advertising to your interests, both on and off this website.

Setting consent to personalization

To make it easier for you to browse the site, to offer you customized content or advertising, and to analyze traffic anonymously, we use cookies that we share with our partners for social media, advertising, and analytics. You can adjust their settings with the "Edit settings" link and you can change it at any time in the footer of the website. You can find more detailed information in our Policy on the protection of personal data and the use of cookies.